User manual PANASONIC SL-CT495J

[. . . ] Concerning Compact Discs Only compact discs bearing this mark can be used with this unit. However, continued use of irregular shaped CDs can damage the unit. Portable CD player Dear Customer Operating Instructions Model No. Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. The model number and serial number of this product can be found on either the back or the bottom of the unit. [. . . ] Refer to the parentheses in the illustration for the different types of confirmation tones. Press and hold during play. (Beep. . . Beep) VOL Turning the operation tones off and on » While stopped or during play » Press and hold [EQ] on the remote control for 5 seconds until the unit's display appears. The tone sounds when the setting is changed. Press and hold during play or stop mode. To turn off the unit VOL Decrease (Beep) VOL Increase (Beep) (Beep. . . Bee. . . p) EQ HOLD EQ To adjust the volume The volume range is 0­25. (Press and hold to change the volume successively. ) A tone (beep-beep) sounds when you reach the minimum or maximum volume. Changing the sound quality To turn the tone off To turn the tone on Press during play or stop mode. EQ The setting switches in the sequence indicated below each time [EQ] is pressed. S-XBS>TRAIN>Cancel (no indicator is shown) EQ HOLD ^==========b (Beep) S-XBS: Select this setting to boost the low frequency range response. TRAIN: Select this setting to avoid annoying other passengers with noise from your headphones/earphones while riding on the train, or to reduce fatigue when listening for a long period of time. Note! The setting returns to S-XBS when you disconnect the power source. Using the Unit with Optional Accessories Using the unit with an audio system Turn off this unit and the other equipment before connection. 1 Connect the remote control to [Ë] on the unit. 2 Connect the stereo connection cable to the remote control and the other equipment. The unit may malfunction if you connect directly to [Ë] on the unit. Do not connect the cable to the PHONO jacks on the amplifier. 3 Turn the operation tones off (see above) so they are not heard when you press buttons on the remote control. Make further volume adjustments with the other equipment. Using the unit with a car audio system Use only the specified car stereo cassette adaptor and car adaptor. Using other adaptors can cause overheating which can lead to fire. The part numbers are indicated in parenthesses. MEM ORY Items to be purchased For connection to the car audio system Car stereo cassette adaptor (SH-CDM10A) Connect the car stereo cassette adaptor to the earphone jack of th remote control and connect it to the unit's headphone jack. For securing the unit and connecting the power supply: Car adaptor (SH-CDC9) Car mounting kit (SH-CDF20) Note when using the car mounting kit (SH-CDF20) 1Remove the screw from Bracket the bracket at the rear of the car mounting base. 2Replace the screw in the lower hole of the bracket. Screwdriver VO L M O DE C EQ ALL RE Other equipment HO LD N E P O (White) Ë L To CD or AUX Headphone jack (Ë) (Red) R terminals Note! Obtain the optional connecting cable if the other equipment comes with mini-phone jacks. If you connect speakers (active or otherwise) directly to the unit's headphone jack, ensure they have an impedance of 1 k or less. VOL Stereo connection cable (not included) Note! When you switch off the car, volume and sound quality may return to the original settings and the resume function may work even if you change the disc. It may not be possible to use the unit with some types of car stereos owing to restrictions imposed by the construction of the car stereo cassette adaptor. For further details, refer to the instructions of the part concerned. RQT6367 5 ONLY FOR U. S. A. Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. 9. 5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Portable Audio Limited Warranty Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as "the Warrantor") will repair or replace this product with new or refurbished parts or equivalent product, free of charge in the U. S. A. or Puerto Rico, in the event of a defect in materials or workmanship as follows ( all time periods commence from the date of original purchase ) : PARTS & LABOR - ONE (1) YEAR Non-rechargeable batteries are not warranted Rechargeable batteries - (when applicable) exchange defective item for new one for ten (10) days. [. . . ] Do not allow metal objects to touch the battery terminals as this may cause short-circuiting which is dangerous. When carrying batteries in a pocket or bag, ensure no metal objects such as necklaces are placed together with them. Contact with metal may cause short-circuiting which can cause a fire. For safety, carry the batteries in the battery carrying case. Do not play your headphones or earphones at a high volume. [. . . ]