User manual PANASONIC SL-H304

[. . . ] 2 pcs. VRemote control (RAK-PR300) . 1 pc. VStereo VBatteries for remote control . 2 pcs. Table of Contents Cautions for AC Mains Lead. . . . . . . . . . . . . . . . . . . . . . 3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Analog Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Digital Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (Recording level adjustment is not possible when recording using digital signals. ) When CD ANALOG recording is selected, the recording level is set automatically to the CD in the 3-CD changer. 53 1 2 Insert a recordable CD-R or CD-RW. Select a recording source. To increase the recording level from LINE IN When recording the sound from LINE IN, if the recording level is still low after adjustment of the analog recording level stated above, change "LINE IN GAIN" to "HIGH". "LINE IN GAIN" is set to "LOW" at the time of purchase. Place the unit in the stop mode and follow the steps below. 1 2 3 4 5 Press the MENU button. Turn the MULTI JOG to select "LINE IN GAIN". Turn the MULTI JOG to select "HIGH". Press the SET button. "TRACK ERASE" is shown in the information display. Use the REC SELECTOR button to select the recording source. Press the button repeatedly to toggle between sources. The source type will appear in the display window, and a lamp (DIGITAL, CD or LINE) will light on the front panel showing the selected source. The order of toggling and appearance of the sources in the information display (starting from OPTICAL IN) are as follows. OPTICAL IN: Record digital signals via the OPTICAL terminal. Play the sound of the source to be recorded. When recording is complete Press the CDR Control STOP s button to stop. The p indicator in the display window flashes and operation stops. Notes You cannot record from multiple CDs. If create a program that changes CDs, a blank track of a few seconds will be added and recording will stop. When "UNLOCK" is shown in the information display, the DIGITAL IN terminal is not connected properly to the source unit. Upon completion of recording, the p indicator flashes in the display window. Operating any button while this indicator is flashing may render the disc being recorded unusable. Always wait until the p indicator stops flashing before proceeding with the next operation. When digital input signals are supplied, they will be recorded in their original digital form as long as the source signal is not from a first-generation digital copy (refer to SCMS on see page 48). There is no need to adjust the recording level. Fade In/Fade Out Recording (analog only) This feature can be used to record analog sound other than CD ANALOG. Located immediately below the CONTROL CD button on the remote control is a special button (FADE) that allows you to perform fade in and fade out of sound at the beginning and end of tracks when you are recording analog signals. [. . . ] Notes If something important is going to be recorded, always test-record first to check that the recording turns out properly before proceeding with the actual recording. The manufacturer assumes no liability whatsoever for any damages resulting from missed opportunities or accidental erasure that occurs while conducting recording or play operations due to malfunctioning of or trouble in the unit, or for any incidental damage. RQT6091 English "' SL-H304EB. fm Page 50 Thursday, September 20, 2001 3:42 PM Concerning CDs Compatible Disc Formats The following disc formats can be used for recording in the CDR. In addition to the marks shown on the right, the phrases shown below or their equivalent should also be present somewhere on the packaging or accompanying documentation: FOR CONSUMER FOR CONSUMER USE FOR MUSIC USE ONLY Discs that cannot be used for recording are as follows: Discs bearing marks other than those shown above Discs intended for professional use and/or marked "FOR PROFESSIONAL USE ONLY" Discs intended for recording computer data In addition to the two disc formats shown above, the following disc format can also be played in either the 3-CD changer or CDR. Notes The unit can playback audio data recorded on CD-G, CD-EXTRA and CD-Text discs as well, however the text information of CDText discs cannot be displayed. If a CD-R or CD-RW has been recorded using a personal computer, playback is only possible if the disc is recorded in the CDDigital Audio format. [. . . ]