User manual PANASONIC SL-P3

[. . . ] Wipe from the center toward the outer circumference. Supplied Accessories Play surface (shiny surface) AC adaptor . (RFEV705P-KS) yy , , yy , , yy , , yy , , yy , , SL-P3 Check the packing carton for these accessories. Rechargeable Ni-Cd batteries with battery carrying case . (RP-BP60BPYS1) Remove the rechargeable batteries from their case before use. If moisture has formed on a disc When moisture has formed because the disc was brought suddenly into a warm room from a cold environment, wipe it off using a soft dry cloth. Handling precautions On the label side (the side with writing) Do not write anything using a pencil, ballpoint pen, etc. On the disc (shiny) side Handle this side carefully to keep it free from fingerprints or scratches. [. . . ] (Plug in firmly. ) Play stops automatically when all the tracks have been played. If the unit has been connected to the car audio system, adjust the volume level between 4 and 6 on the unit, then adjust the volume level on the system. For your reference: ")" indication This indication appears for about 30 seconds if [1;] is pressed when no disc is loaded in the unit or if the disc is not completely seated. Operation Display/reference "*" indication This indication appears for about 10 minutes when the cover is opened. (However, the indication does not appear when the unit is powered off. ) Press during play. To pause play 1; Note! Press again to restart play. Press during play. POWER OFF Never insert foreign objects into the unit body. Total number of tracks Removing discs After the disc has stopped rotating, press [PUSH] to release the disc. (To protect the disc, never open the cover while it is playing. ) To stop play Stop mode Total playing time ER Press during stop mode. POW OFF PUSH To turn off the unit Off mode PUS Skip forward/ backward (skip function) Press during play. (Backward) 6 (Forward) 5 : 9 Rapid forward/ backward (search function) During program play (page 4), these buttons are used to skip forward or back through the programmed sequence of tracks. During random play (page 4), the skip buttons cannot be used to skip back to tracks that were played previously in the random sequence. During program play, random play or 1 track repeat play (page 4), search operation is limited to the current track only. Auto power off function If the unit is left in stop or paused status for approximately 10 minutes, the unit powers itself off automatically in order to prevent the battery from running down. (If no disc is loaded in the unit, it powers itself off in 30 seconds. ) Keep depressed during play. 3 H Other Play Methods The letters such as A in the various illustrations refer to the descriptions in the "Location of Controls" section (see page 2). Skip play The disc plays from the specific track through to the end, then play stops automatically. Preparation: Put unit in stop mode. Program play Up to 24 tracks can be entered in the programmed sequence. 9. 5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Phone (787) 750-4300 Fax (787) 768-2910 6 Product Service Do not attempt to remove the cover(s) or repair the unit yourself. Refer servicing to qualified personnel only. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE TO RAIN, SPLASHING, DRIPPING OR MOISTURE. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. This device complies with Part 15 of the FCC Rules. [. . . ] Recharging already charged batteries will shorten their service life. When recharging batteries for the first time or when they have not been used for a long period of time, the play time may be shorter than usual. In a case like this, repeatedly recharge and discharge the batteries. This will restore them to their regular state. [. . . ]