User manual PANASONIC SL-PD7

[. . . ] Please note them in the space provided below and keep for future reference. SL-PD7 MODEL NUMBER SERIAL NUMBER Operating Instructions Model No. SL-PD7 PO RTAB LE CD PL R E AY secon ds How to remove a disc from its case How to store the disc in its case Label side up SL -C T7 AN 90 SY TI-SK STEM IP VOL OPEN CHG How to hold a disc Supplied Accessories If the surface is dirty Wipe it with a damp cloth and then wipe dry. Wipe from the center toward the outer circumference. [. . . ] You cannot skip to tracks that have been played in random or random repeat play (page 6). During program play, random play, random repeat play or 1-track repeat play (page 6), search operation is limited to the current track only. Skipping tracks Backward Forward EQ MODE MEMORY Searching through tracks Press and hold during play. Backward (Beep Beep Beep) Forward (Beep Beep) Press and hold during play. Using the remote control Operation confirmation tones This tone sounds when a button on the remote control is pressed. Refer to the parentheses in the illustrations for the different types of confirmation tones. When using batteries The display light The light in the remote control's display comes on for about 5 seconds when you press a button, unless the hold function is on. To check the current display Change the position of the hold switch. This unit includes a mechanism that extends the life of the batteries by varying the rotation rate of the motor. Motor noise may increase when the rate changes. If the noise bothers you Use the AC adaptor to power the unit. The rotation rate does not change while you are using the AC adaptor. Turning the operation tone on and off While stopped or during play Press and hold [EQ] for 5 seconds until the display appears. The tone sounds when the setting is changed. EQ MODE MEMORY To turn the tone on S-XBS To turn the tone off S-XBS Anti-Skip System This system deals with skipping in a variety of ways: The thinner and lighter construction makes the unit less susceptible to vibration. An anti-skip mechanism prevents skipping caused when play speed changes due to swinging of the unit. A recovery system immediately returns the laser pickup to its original position if it is knocked off the track by a strong shock. An anti-skip memory (max. 48 seconds) fills in interruptions caused by bumps and vibrations. To check the display connect the remote control to the headphone jack. 1 Connect the remote control to [Ë] on the unit. 2 Connect the stereo connection cable to the remote control and the other equipment. Do not connect the cable to the PHONO jacks on the amplifier. 3 Turn the operation tones off (see page 5) so they are not heard when you press buttons on the remote control. Make further volume adjustments with the other equipment. CHG Using the unit with a car audio system Headphone jack (Ë) VOL Other equipment HOLD Side panel of the unit (White) L To CD or AUX (Red) R terminals Use only the specified car stereo cassette adaptor and car adaptor. Using other adaptors can cause overheating which can lead to fire. The part numbers are indicated in parentheses. Items to be purchased For connection to the car audio system: Car stereo cassette adaptor (SH-CDM10A) Connect the car stereo cassette adaptor to the earphone jack of the remote control and connect it to the unit's headphone jack. For connection to the power supply: Car adaptor (SH-CDC9) Remote control T. MARK/EQ MODE LIGHT/ DISP Stereo connection cable (not included) Note! When you switch off the car, volume and sound quality may return to the original settings and the resume function may work even if you change the disc. It may not be possible to use the unit with some types of car stereos owing to restrictions imposed by the construction of the car stereo cassette adaptor. For further details, refer to the instructions of the part concerned. Note! Obtain the optional connecting cable if the other equipment comes with mini-phone jacks. 6 ONLY FOR U. S. A. Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. [. . . ] Any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EST. 1924 Do not play your headphones or earphones at a high volume. [. . . ]