User manual PANASONIC SL-PD887

[. . . ] Please note them in the space provided below and keep for future reference. SL-PD887 MODEL NUMBER SERIAL NUMBER Operating Instructions Model No. SL-PD887 How to remove a disc from its case How to store the disc in its case Label side up How to hold a disc Supplied Accessories If the surface is dirty Wipe it with a damp cloth and then wipe dry. Wipe from the center toward the outer circumference. [. . . ] (The disc lid can still be opened and closed. ) "(" indication When the main unit is in HOLD mode, pressing any button causes the indication "(" to appear on the display. The HOLD function prevents the following: The unit is powered on accidentally when not in use, causing the batteries to run down. A button is accidentally pressed during play, interrupting the operation. When the unit is powered off The "(" indication appears only when [1;] (main unit) is pressed. HOLD HOLD To use the HOLD function Set [HOLD] to the HOLD position. The unit and wired remote control have HOLD functions, each of which works independently. Before operating the buttons Be sure to move [HOLD] to release the unit from the HOLD mode. HOLD mode 2 Sequential Play Basic Play 4 Track number in play 5 VOL VOL VOL C S-XBS TRAIN VOL C S-XBS TRAIN Increase ALL1 M RANDOM SORRY ALL1 M RANDOM SORRY Decrease Elapsed playing time of each track 1 Close the lid OPEN Label must face upward. Plug type: 3. 5 mm (1/8 in. ) stereo OF F 3 Button Press during play. HOLD 2 R L Follow steps 1­5. In step 2: Connect the stereo headphones and wired remote control to the headphone jack [Ë]. (Plug in firmly. ) In step 5: The volume range is 0-25. Press and hold to change the volume successively. The volume changes when pressed while the level is displayed. If any other display is shown, it changes to show the current level. (The volume returns to 10 when you disconnect the power source. ) Play stops automatically when all the tracks have been played. If the unit has been connected to the car audio system, set this unit's volume to 10, then adjust the volume level on the system. Operation To pause play To stop play Stop mode To turn off the unit Off mode Skip forward/ backward (skip function) Rapid forward/ backward (search function) Press during play. (Press [:] twice to skip to the beginning of the previous tracks. ) Backward Forward Press and hold during play. During program play (page 4), these buttons are used to skip forward or backward through the programmed sequence of tracks. You cannot skip to tracks that have been played in random or random repeat play (page 4). (When doing this, set this unit's volume to 10. ) For securing the unit and connecting the power supply: Car adaptor (SH-CDC9) Car mounting kit (SH-CDF20) Note when using the car mounting kit (SH-CDF20) Bracket 1Remove the screw from the bracket at the rear of the car mounting base. 2Replace the screw in the lower hole of the bracket. Other equipment (White) L CD or AUX (Red) Headphone jack(Ë) Using the unit with an audio system For your reference: Obtain the optional connecting cable if the other equipment comes with mini-phone jacks. If you connect speakers (active or otherwise) directly to the unit's headphone jack, ensure they have an impedance of 1 k or less. Note! Do not connect the cable to the PHONO terminals on an amplifier. R Wired remote control Stereo connection cable (not included) Screwdriver Turn off this unit and the other equipment before operation. Note! When you switch off the car, volume and sound quality may return to the original settings and the resume function may work even if you change the disc. It may not be possible to use the unit with some types of car stereos owing to restrictions imposed by the construction of the car stereo cassette adaptor. For further details, refer to the instructions of the part concerned. 1 2 Connect the remote control to the unit's headphone jack. Connect the stereo connection cable to the remote control's headphone jack and the terminals on the other unit. The unit may malfunction if you connect this cable directly to the unit. 3 4 Set the volume to 10. Make further volume adjustments with the other unit. Control play with the buttons on the main unit. The tone will be heard if you use the buttons on the remote control. RQT5849 5 Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 Limited Warranty Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as "The warrantor") will repair or replace this product with new or refurbished equivalent product, free of charge, in the U. S. A. or Puerto Rico from the date of original purchase in the event of a defect in materials or workmanship as follows: For one (1) year--Radio, Clock Radio, Radio with Tape Player or Recorder, Speaker For ten (10) days--Batteries--(when applicable)--New rechargeable batteries in exchange for defective rechargeable batteries. Non-rechargeable batteries are not warranted. For ninety (90) days--SD Memory Card--New SD card of the same memory capacity in exchange for a defective SD Card for ninety (90) days. [. . . ] Do not mix different types of batteries or old and new batteries. Remove the batteries if you do not intend to use the unit for a long time. Do not throw into fire, short-circuit, disassemble, or subject to excessive heat. Do not attempt to recharge dry cell batteries. [. . . ]