User manual PANASONIC SL-PJ28A

[. . . ] 1 (L0BAB0000124) External battery case . 1 (RFA1572-H) Handling precautions If you are taking the CD from a cold to a warm environment, moisture may form on the CD. Wipe this off with a soft, dry, lint-free cloth before using the CD. Do not write on the label side with a ball-point pen or other writing instrument. [. . . ] It is also usually canceled when you replace the CD while the unit is in stop mode. The resume function may work if you replace the CD while the unit is off. If you turned the unit off near the end of the track, play may resume from the beginning of the next track. The resume function works automatically and cannot be turned off. In step 2: Connect the stereo earphones and wired remote control to the headphone jack [Ë]. (Plug in firmly. ) In step 5: The volume range is 0-25. (Press and hold to change the volume successively. ) The volume changes when pressed while the level is displayed. If any other display is shown, it changes to show the current level. Play stops automatically when all the tracks have been played. If the unit has been connected to the car audio system, set this unit's volume to 10, then adjust the volume level on the system. Operation To pause play Button Press during play. Display/reference SORRY VOL ALL1 M 1; Press during play. Total number of tracks S RANDOM LIVES -XBSTRAIN Press again to restart play. Removing discs 1 Press [, OPR OFF] to stop play and disc rotation. 3 Press [PUSH] to release the disc. Do not stop the disc by hand or try to remove it before it stops rotating. S-XBS>TRAIN>LIVE>Cancel (no indicator is shown) ^ -------------------------------------------------------------} Decrease (Beep) VOL Increase (Beep) S-XBS: Select this setting to boost the low-range response. To adjust the volume The volume range is 0­25. (Press and hold to change the volume successively. ) A tone (beep-beep) sounds when you reach the minimum or maximum volume. TRAIN: Select this setting to avoid annoying other passengers with noise from your stereo earphones while riding on the train, or to reduce fatigue when listening for a long period of time. LIVE: Select this setting for a live concert effect. This function does not work if you have connected a cable to the [OPT OUT/OUT] jack. The setting is canceled when you connect a cable to the terminal, but is restored when you disconnect the cable. The setting cannot be changed while a cable is connected. An error tone (beep-beep-beep-beep) sounds when you press [EQ]. 6 Using the Unit with Optional Accessories Using the unit with an audio system [OPT OUT/OUT] jack Use a stereo phono cable (analogue) or optical cable (digital) to connect to your audio system. Turn off this unit and the other equipment before connection. Do not connect the cable to the PHONO jacks on the amplifier. Obtain the optional phono cable if the other equipment comes with mini-phone jacks. Adjust the volume on the other equipment. You cannot adjust the volume with this unit when a cable is connected to [OPT OUT/OUT] jack. [. . . ] Locations to be avoided Avoid using the unit in the following locations since they can cause malfunctioning. Bathrooms and other moisture-prone places 2. Very hot places near heating appliances, etc. Do not leave the unit exposed to direct sunlight for long periods of time This may deform or discolor the cabinet and may also cause malfunctioning. [. . . ]