User manual PANASONIC SL-PS7

[. . . ] Compact Disc Player Operating Instructions Model No. SL-PS7 Note: "EB" on the packaging indicates the United Kingdom. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. EB RQT5414-B Supplied accessories Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. Dear customer Thank you for purchasing this product. [. . . ] If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body. Correct method of use (R6, AA, UM-3) Operation notes ·Do not place obstacles between the remote control signal sensor and remote control unit. ·Do not expose the remote control signal sensor to direct sunlight or to the bright light of an invertor fluorescent light. ·Take care to keep the remote control signal sensor and end of the remote control unit free from dust. ·If this system is installed in a rack with glass doors, the thickness and color of the glass doors might make it necessary to use the remote control a shorter distance from the system. Remote control signal sensor / OPEN/CLOSE 1 2 3 4 5 10 DIGITAL RE-MASTER PROCESSING 6 7 8 9 0 SENSOR PEAK SERCH TIME MODE AUTO CUE PROGRAM CLEAR RECALL RANDOM REPEAT PHONES PHONES LEVEL TAPE LENGTH SIDE A/B TIME FADE VIRTUAL BATTERY OPERATION MIN MAX EDIT GUIDE 30° 30° About 7 meters in front of the signal sensor To prevent damage ·Do not place heavy items on the unit. ·Do not disassemble or reconstruct it. ·Do not spill water or other liquids onto it. 5 RQT5414 Controls Main unit Standby/on switch ( H/ I ) Press to switch the unit from on to standby mode or vice versa. ·When you use the timer with another unit, be sure to turn this unit on. 3 OPEN/CLOSE Total number of tracks Total playing time Virtual battery operation This unit has a circuit (virtual battery) which operates to remove the small amount of noise contained in the mains when playing. TRACK MIN SEC 1 2 3 4 5 6 7 8 9 10 11 12 Displayed if there are 21 or more tracks on the disc. 4 Track currently playing Index number TRACK INDEX MIN SEC 1 2 3 4 5 6 7 8 9 10 11 12 Do not use irregular shape CDs. ·During random play ( page 8): You cannot skip backward to previous tracks. You can search only in the current track. ·During program play ( page 9): Skipping is performed in the programmed order. You can search only in the current track. ·During A-B repeat ( page 10): Searching can be performed beyond the A-B segment. (A-B repeat will not be canceled. ) Elapsed time To improve sound quality Switch [RE-MASTER PROCESSING] (located on the rear panel) to "ON". The RE-MASTER circuit starts operating and sound quality is improved. [RE-MASTER] is switched to "ON" at the time of shipment. R OUT L DIGITAL RE-MASTER PROCESSING ON OFF DIGITAL OPTICAL OUT 7 RQT5414 Direct access play 1 9 0 10 With this function, a disc is played from a desired track to the last track and then stops automatically. Press the numeric buttons. Play will begin from the selected track number. To select a two-digit track Press [10] and then the two numbers you want within 7 seconds. For example Track No. 30: [10] [3] [0] RANDOM 1 9 0 10 Random play With this function, all tracks on a disc are played one time each in random order, and then play stops automatically. Press [RANDOM]. TRACK INDEX MIN SEC Random play is canceled when play is stopped. 1 2 3 4 5 6 7 8 9 10 11 12 To cancel random play Press [RANDOM]. For your reference RANDOM RANDOM TRACK INDEX MIN SEC During program play: The programmed tracks will be played in random order. 1 2 3 4 5 6 7 8 9 10 11 12 8 RQT5414 Program play 1 23 With this function, you can program up to 20 tracks in any order you like. 1 2 CLEAR RECALL While the disc is stopped: Press [PROGRAM]. If the button is pressed while the disc is playing, that track is programmed as the first. Press the numeric buttons to specify the track numbers in order. If you make a mistake when pressing a track number, press [CLEAR]. 3 Press [ ]. 1 2 Tracks are played in the programmed order, and then play stops automatically. Program contents are stored even after play ends. To play the same program contents again, press [ ]. PROGRAM PROGRAM TRACK No. To cancel program mode Press [PROGRAM]. 1 2 3 4 5 6 7 8 9 10 11 12 To select a two-digit track Press [10] and then the two numbers you want within 7 seconds. 1 9 0 10 For example Total playing time of programmed tracks PROGRAM TRACK No. 30: [10] [3] [0] Checking program contents 1 2 3 4 5 6 7 8 9 10 11 12 Press [RECALL]. Each time the button is pressed, a track number and sequence number are displayed. Last track number programmed Number of tracks programmed To program additional tracks Press the numeric buttons. 3 To erase programmed tracks ·To erase the last programmed track While the disc is stopped: Press [CLEAR]. One track is erased each time the button is pressed. ·To erase a track within the program Press [RECALL] to display the track to be erased, and then press [CLEAR] to erase the displayed track. [. . . ] Wipe this off with a soft, dry, lint-free cloth before using the CD. ·Do not write on the label side with a ball-point pen or other writing instrument. ·Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. ·Do not attach labels or stickers to CDs. [. . . ]