User manual PANASONIC SL-S201C

[. . . ] Please note them in the space provided below and keep for future reference. MODEL NUMBER SL-S201C SERIAL NUMBER How to remove a disc from its case How to store the disc in its case Label side up How to hold a disc y , yy , , yy , , yy , , yy , , y , Model No. Operating Instructions SL-S201C Supplied Accessories Check the packing carton for these accessories. If the surface is dirty Wipe it with a damp cloth and then wipe dry. Wipe from the center toward the outer circumference. [. . . ] Play being cut off unexpectedly in the middle of a selection. When the unit is powered off The "(" indication appears only when [1 ;] is pressed. Before operating the buttons Be sure to move [HOLD] to release the unit from the hold mode. To use the HOLD function Set [HOLD] to the HOLD position. 2 A Skip/search buttons (:, 9 6 , 5) B Display C Stop/operation off button (, OPR OFF) D Play/pause button (1 ;) E Repeat button (`) F Memory/recall button (MEMORY/RECALL) G Open button (OPEN) H Headphone volume control (VOLUME) Anti-shock button (A. SHOCK) S-XBS button (S-XBS) Headphone jack (Ë) Play mode selector (RESUME, RANDOM, NORMAL) M Hold switch (HOLD) N CD release button (PUSH) O DC IN jack (K DC IN 4. 5 V) I J K L Sequential Play Basic Play 1 6 : Label must face upward. EN Press here to close the lid. 2 3 HOLD OP RANDOM NORMAL RESUME 5 9 Plug type: 3. 5 mm (1/8 in. ) stereo 4 R L OPR OFF B 5 Button Track number in play P Elapsed playing time of each track 6 VOLUME 654 Follow steps 1­6. In step 4, connect the stereo headphones/earphones to the Ë jack. (Plug in firmly. ) Play stops automatically when all the tracks have been played. If the unit has been connected to the car audio system, adjust the volume level between 4 and 6 on the unit, then adjust the volume level on the system. For your reference: ")" indication This indication appears for about 30 seconds if [1 ;] is pressed when no disc is loaded in the unit or if the disc is not properly secured. Operation Display/reference "*" indication This indication appears for about 10 minutes when the cover is opened. (However, the indication does not appear when the unit is powered off. ) Press during play. To pause play P Note! Press again to restart play. Press during play. OPR OFF B Never insert foreign objects into the unit body. Total number of tracks Removing discs To stop play 1 2 3 Stop mode Total playing time Press during stop mode. OPR OFF Press [, OPR OFF] to stop play and disc's rotation. Press [PUSH] to release the disc. Do not stop the disc by hand or try to remove it before it stops rotating. This can damage CDs. To turn off the unit Off mode B Skip forward/ backward (skip function) PUS (Backward) 6 (Forward) 5 : 9 Rapid forward/ backward (search function) Auto power off function If the unit is left in stop or paused status for approximately 10 minutes, the unit powers itself off automatically in order to prevent the battery from running down. (If no disc is loaded in the unit, it powers itself off in about 30 seconds. ) Press and hold during play. 3 H PUSH Press during play. During program play (page 4), these buttons are used to skip forward or back through the programmed sequence of tracks. During random play (page 4), the skip buttons cannot be used to skip back to tracks that were played previously in the random sequence. 9. 5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Phone (787) 750-4300 Fax (787) 768-2910 6 Product Service Do not attempt to remove the cover(s) or repair the unit yourself. Refer servicing to qualified personnel only. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE TO RAIN, SPLASHING, DRIPPING OR MOISTURE. THE FOLLOWING APPLIES ONLY IN THE U. S. A. : CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. This device complies with Part 15 of the FCC Rules. [. . . ] Special rechargeable Ni-Cd batteries: Care To prevent battery damage, electrolyte leakage and short-circuiting, heed the following points. Do not peel off the covering on batteries and do not use if the covering has been peeled off. Align the poles + and - correctly when inserting the batteries. Do not mix different types or makes of batteries or old and new batteries. [. . . ]