User manual PANASONIC SL-SX240

[. . . ] Concerning Compact Discs Only compact discs bearing this mark can be used with this unit. However, continued use of irregular shape CDs can damage the unit. Portable CD player Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Operating Instructions SL-SX280 SL-SX240 How to remove a disc from its case How to store the disc in its case Label side up How to hold a disc If the surface is dirty Wipe it with a damp cloth and then wipe dry. Wipe from the center toward the circumference. Note: "EB" on the packaging indicates the United Kingdom. Play surface (shiny surface) Supplied Accessories Check the packing carton for these accessories. [. . . ] It may not be able to play some CD-R or CD-RW due to the condition of the recording. § " " indication This indication appears for about 30 seconds if [1;] (main unit) or [/1] (remote control SL-SX280 ) is pressed when no disc is loaded in the unit or if the disc is not properly secured. "*" indication This indication appears for about 10 minutes when the lid is opened. (However, the indication does not appear when the unit is powered off. ) Finalizing is a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW. HOLD Function SL-SX280 This function causes the unit to ignore short, accidental To use the HOLD function button presses. (The disc lid can still be opened and Set [HOLD] to the HOLD position. closed. ) "(" indication HOLD HOLD When the unit is in HOLD mode, pressing any button causes the indication "(" to appear on the display. The unit is powered on accidentally when not in use, When the unit is powered off causing the batteries to run down. The "(" indication appears only when [1;] (main A button is accidentally pressed during play, interruptunit) is pressed. Before operating the buttons SL-SX280 Be sure to move [HOLD] to release the unit from the The unit and wired remote control have HOLD funcHOLD mode. tions, each of which works independently. The HOLD function prevents the following: 3 HOLD mode H PUSH OPR O FF C S-XBS TRAIN ALL1 M RANDOM SORRY Other Play Methods The letters such as A in the illustrations refer to the descriptions in the "Location of Controls" section. (See page 2. ) Skip play The disc plays from the specified track through to the end, then play stops automatically. You cannot select random play or random repeat play during program play. The mode is canceled when you disconnect the power source. B VOL 3 4 Repeat steps 1 and 2 to program all the desired tracks. F OPR EQ O FF Anti-Skip System This system deals with skipping in a variety of ways: To program the same track in the sequence more than once After step 2, press [MEMORY/RECALL] the desired number of times. When bumps continue repeatedly If "'" is displayed No more tracks can be programmed. To confirm the contents of the program Press [MEMORY/RECALL] while the disc is playing. (The number of the programmed tracks appear on the display in sequence. ) To delete the entire programmed sequence Press [, OPR OFF]. The message "SORRY" appears on the display and An anti-skip mechanism prevents skipping caused sound is interrupted. when play speed changes due to swinging of the unit. A recovery system immediately returns the laser pickVOL up to its original position if it is knocked off the track by A a strong shock. C S-XBS TRAIN The anti-skip memory ( SL-SX280 40 seconds, SL-SX240 ALL1 M 10 seconds) fills in interruptions caused by bumps and RANDOM SORRY vibrations. The anti-skip system works automatically while the Note!The anti-skip memory compresses digital signals. Note! The repeat and random play modes are canceled after steps 1 and 2. 4 RQT5792 Using the Wired Remote Control The remote control can be operated regardless of the hold mode of the unit. SL-SX280 How to use the wired remote control Press once during off or stop mode. (Press [:] twice to skip to the beginning of the previous tracks. ) Preparation: Release the remote control from the HOLD mode. To start play (Beep) Skipping tracks Backward (Beep Beep Beep) HOLD To stop play Press once during play. Searching through tracks Forward (Beep Beep) Press and hold during play. (Beep. . . Beep) Operation confirmation tones When an operation button is pressed, a confirmation tone sounds. Refer to the parentheses in the illustration for the different types of confirmation tones. Press and hold during play or stop mode. To turn off the unit (Beep. . . Bee. . . p) To adjust the volume The volume range is 0­25. (Press and hold to change the volume successively. ) A tone (beep-beep) sounds when you reach the minimum or maximum volume. Decrease (Beep) VOL Increase (Beep) Using the Unit with Optional Accessories Using the unit with an audio system Using a stereo phono cable (not included), you can listen to CDs on your audio system. Turn off this unit and the other equipment before connection. [. . . ] When carrying batteries in a pocket or bag, ensure no metal objects such as necklaces are placed together with them. Contact with metal may cause short-circuiting which can cause a fire. (For United Kingdom) Unit No altering or remodeling This can cause malfunctioning. No dropping or strong impacts This may damage the unit. [. . . ]