User manual PANASONIC SL-SX291CP

[. . . ] Concerning Compact Discs Only compact discs bearing this mark can be used with this unit. However, continued use of irregular shaped CDs can damage the unit. Portable CD Player Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. SL-SX291C ONLY To install this product in a car, please refer to the "Installation Instructions". [. . . ] (Press [:] twice to skip to the beginning of the previous tracks. ) Backward Forward Press and hold during play. During program play (page 4), these buttons are used to skip forward or backward through the programmed sequence of tracks. Preparation: Put unit in stop mode. Program play Up to 24 tracks can be entered in the programmed sequence. Preparation: Put unit in stop mode. Repeat play/Random play Press during play or stop mode. 1 Select the desired track. 1 Select the desired track. E M O DE G OPR G OPR The setting is switched in the sequence indicated below each time [MODE] is pressed. FF O O 2 F OPR FF 2 1-track repeat (1 `)( ----------------] One track is repeated. v (The indication "M" and the programmed seAll-track repeat (`) quence appear on the display. ) All the tracks on the disc are repeated. LL Register in sequence. A EC | | | | | | | | | MEM OR Y/ R v VOL Random (RANDOM) The tracks play once each in random order and then play stops. EQ O B FF VOL Changing the sound quality Press during play or stop mode. MEM OR Y/ R L AL EC v 3 4 Repeat steps 1 and 2 to program all the desired tracks. Random repeat (RANDOM, `) | The tracks play repeatedly in random | order. v VOL Cancel (no indicator is shown) --------------} | | D When pressed during program play VOL F EQ OPR The setting is switched in the sequence indicated below each time [MODE] is pressed. 1-track repeat (1 ` M)(------------] FF O The setting switches in the sequence indicated below each time [EQ] is pressed. S-XBS>TRAIN>Cancel (no indicator is shown) ^==========b S-XBS: Select this setting to boost the low frequency range response. | To program the same track in the se- Memory repeat (` M) The programmed tracks are repeated. | quence more than once v | After step 2, press [MEMORY/RECALL] desired Cancel (M) -------------------------------------------} number of times. One track is repeated. v | | If "'" is displayed No more tracks can be programmed. Note! TRAIN: Select this setting to avoid annoying other passengers with noise from your headphones while riding on the train, or to reduce fatigue when listening for a long period of time. Note! The setting returns to S-XBS when you disconnect the power source. Note! You can select the first track to play in random play and random repeat play by pressing [9] while the To confirm the contents of the program disc is stopped. Press [MEMORY/RECALL] while the disc is playing. (The numbers of the programmed tracks appear on You cannot select random play or random repeat play during program play. the display in sequence. ) The resume function does not work when random or To delete the entire programmed serandom repeat are on. quence The mode is canceled when you disconnect the power Press [, OPR OFF]. source. The repeat and random play modes are canceled after steps 1 and 2. Using the Unit with Optional Accessories Using the unit with an audio system Using stereo connection cable (not included), you can listen to CDs on your audio system. Turn off this unit and the other equipment before connection. Do not connect the cable to the PHONO jacks on the amplifier. Obtain the optional connecting cable if the other equipment comes with mini-phone jacks. Adjust the volume on the other equipment. Set this unit's volume to 10. Using the unit with a car audio system Use only the supplied or recommended car stereo cassette adaptor and car adaptor. Use of other car adaptors can damage the unit. SL-SX291C comes with a car stereo cassette adaptor and car adaptor. Refer to the "Installation Instructions" (attached sheet). For SL-SX293 and SL-SX290, obtain the following, available as optional accessories (part numbers are indicated in parentheses). [. . . ] Do not peel off the covering on batteries and do not use if the covering has been peeled off. Align the poles + and - correctly when inserting the batteries. Do not mix different types of batteries or old and new batteries. Remove the batteries if you do not intend to use the unit for a long time. [. . . ]