User manual PANASONIC SL-SX293PC

[. . . ] Concerning Compact Discs Only compact discs bearing this mark can be used with this unit. However, continued use of irregular shaped CDs can damage the unit. Portable CD player Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Operating Instructions Model No. SL-SX293 SL-SX290 How to remove a disc from its case How to store the disc in its case Label side up How to hold a disc The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. [. . . ] During program play, 1-track repeat play, random play and random repeat play (page 4), search operation is limited to the current track only. Note on CD-R and CD-RW This unit can play CD-DA format audio CD-R and CD-RW that have been finalized§ upon completion of recording. S-XBS>TRAIN>Cancel (no indicator is shown) ^==========b S-XBS: Select this setting to boost the low-range response. | To program the same track in the se- Memory repeat (` M) The programmed tracks are repeated. | quence more than once v | After step 2, press [MEMORY/RECALL] desired Cancel (M) -------------------------------------------} number of times. One track is repeated. v | | If "'" is displayed No more tracks can be programmed. Note! TRAIN: Select this setting to avoid annoying other passengers with noise from your headphones while riding on the train, or to reduce fatigue when listening for a long period of time. Note! The setting returns to S-XBS when you disconnect the power source. Note! You can select the first track to play in random play and random repeat play by pressing [9] while the To confirm the contents of the program disc is stopped. Press [MEMORY/RECALL] while the disc is playing. (The numbers of the programmed tracks appear on You cannot select random play or random repeat play during program play. the display in sequence. ) The resume function does not work when random or To delete the entire programmed serandom repeat are on. quence The mode is canceled when you disconnect the power Press [, OPR OFF]. source. The repeat and random play modes are canceled after steps 1 and 2. Anti-Skip System This system deals with skipping in a variety of ways: An anti-skip mechanism prevents skipping caused when play speed changes due to swinging of the unit. A recovery system immediately returns the laser pickup to its original position if it is knocked off the track by a strong shock. The 40-second anti-shock memory fills in interruptions caused by bumps and vibrations. Using the Unit with Optional Accessories Using the unit with an audio system Using stereo connection cable (not included), you can listen to CDs on your audio system. Using the unit with a car audio system Items to be purchased For connection to the car audio system Car stereo cassette adaptor (SH-CDM10A) Connect the car stereo cassette adaptor to [Ë] on the unit. (When doing this, set this unit's volume to 10. ) For securing the unit and connecting the power supply: Car adaptor (SH-CDC9) Car mounting kit (SH-CDF20) Note when using the car mounting kit (SH-CDF20) 1Remove the screw from Bracket the bracket at the rear of the car mounting base. 2Replace the screw in the lower hole of the bracket. Screwdriver Turn off this unit and the other equipment before connection. Do not connect the cable to the PHONO jacks on the amplifier. The anti-skip system works automatically while the Obtain the optional connecting cable if the other system is on and cannot be canceled. When bumps continue repeatedly Adjust the volume on the other equipment. The elapsed playing time disappears and sound is inter- Set this unit's volume to 10. rupted. VOL A C S-XBS TRAIN ALL1 M RANDOM Headphone jack (Ë) Other equipment Note! When you switch off the car, volume and sound quality may return to the original settings and the resume function may work even if you change the disc. It may not be possible to use the unit with some types of car stereos owing to restrictions imposed by the construction of the car stereo cassette adaptor. For further details, refer to the instructions of the part concerned. [. . . ] Do not peel off the covering on batteries and do not use if the covering has been peeled off. Align the poles + and - correctly when inserting the batteries. Do not mix different types of batteries or old and new batteries. Remove the batteries if you do not intend to use the unit for a long time. [. . . ]