User manual PANASONIC SL-XP165

[. . . ] Wipe from the center toward the circumference. Play surface (shiny surface) Note: The "EB" indication shown on the packing case indicates United Kingdom. Supplied Accessories Check the packing carton for these accessories. Handling precautions If you are taking the CD from a cold to a warm environment, moisture may form on the CD. Wipe this off with a soft, dry, lint-free cloth before using the CD. [. . . ] Re-connect the power source and continue operation. HOLD function This function causes the unit to ignore short, accidental "(" indication button presses. (The disc lid can still be opened and When the unit is in hold status, pressing any button closed. ) causes the indication "(" to appear on the display. When the unit is powered off The HOLD function prevents the following: Powering on the unit accidentally (which can cause The "(" indication appears only when [1;] is pressed. Play being cut off unexpectedly in the middle of a selection. s HOLD HOLD HOLD 2 HOLD mode 2 VOLUME r To use the HOLD function Set [HOLD] to the HOLD position. The unit and wired remote control have [HOLD] switches, each of which works independently. Before operating the buttons Be sure to move [HOLD] to release the unit from the hold mode. Sequential Play 5 Basic Play Track number in play 9 OPR OFF 5 1; Elapsed playing time of each track 6 : 4 RESUME RANDOM NORMAL 6 1 Operation VOLUME 654 3 Plug type: 3. 5 mm stereo Close the lid. HOLD Label must face upward. 2 For your reference: ")" indication R L OPEN Follow steps 1­6. In step 2, connect the wired remote control and the stereo earphones to the headphone jack [Ë]. (Plug in firmly. ) Play stops automatically when all the tracks have been played. If the unit has been connected to the car audio system, adjust the volume level between 4 and 6 on the unit, then adjust the volume level on the system. This indication appears for about 30 seconds if [1;] is pressed when no disc is loaded in the unit or if the disc is not properly secured. "*" indication Button Press during play. Display/reference 1; Press again to restart play Total playing time This indication appears for about 10 minutes when the cover is opened. (However, the indication does not appear when the unit is powered off. ) To pause play Press during play. Auto power off function If the unit is left in stop or paused status for approximately 10 minutes, the unit powers itself off automatically in order to prevent the batteries from running down. (If no disc is loaded in the unit, it powers itself off in 30 seconds. ) To stop play Stop mode Press during stop mode. OPR OFF Total number of tracks Removing discs 1 OPR OFF To turn off the unit Off mode Press during play. 2 3 During program play (page 4), these buttons are used to skip forward or back through the programmed sequence of tracks. During random play (page 4), the skip buttons cannot be used to skip back to tracks that were played previously in the random sequence. Do not connect the cable to the PHONO jacks on the amplifier. Obtain the optional connecting cable if the amplifier comes with mini-phone jacks. Adjust the volume level on the amplifier. Using the unit with a car audio system Items to be purchased For connection to the car audio system: Car stereo cassette adaptor (SH-CDM10A) Stereo phono cable (not included) (White) Amplifier L R Connect the car stereo cassette adaptor to the unit's headphone jack. (When doing this, keep the unit's VOLUME at a setting between 4 and 6. ) To CD or AUX terminals Note. Sound quality changes when S-XBS, TRAIN or LIVE is selected, but volume is reduced by approximately fifty percent. Set anti-shock to the 10-second mode or turn it off for purer sound. The 40-second mode digitally compresses the audio signal. You can connect speakers, active or otherwise, with an impedance of 1 k or less to the headphone jacks. Set the unit's volume between 4 and 6. (Red) For securing the unit and connecting the power supply: Car adaptor (SH-CDC9) Car mounting kit (SH-CDF7) B [OPT OUT] jack o Note. It may not be possible to use the unit with some types of car stereo owing to restrictions imposed by the construction of the car stereo cassette adaptor. For further details, refer to the instructions of the part concerned. Side panel of the unit Digital connection B Use a optical cable (not included) to connect to digital recording equipment, such as a mini-disc deck. Optical cable (not included) Turn off the mini-disc deck before connecting the cable. Mini-disc deck To optical in jack Maintenance If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-water solution or a weak detergent solution. Never use alcohol, paint thinner or benzine to clean this unit. [. . . ] Mass and dimensions are approximate. Cautions Selection and care of rechargeable /dry cell batteries Selection As a safety precaution, the portable CD players made by Panasonic are constructed so it is impossible to recharge ordinary batteries. Only batteries especially designed for this unit can be recharged. Care To prevent battery damage, electrolyte leakage and short-circuiting, heed the following points. Do not peel off the covering on batteries and do not use if the covering has been peeled off. Align the poles + and - correctly when inserting the batteries. [. . . ]