User manual PANASONIC SP2729V

[. . . ] (This may cause electrical shock. ) Do not damage the mains lead. (A damaged lead may cause ¿re or electrical shock. ) Do not move the TV with the lead plugged in the socket outlet. Do not place a heavy object on the lead or place the lead near a high-temperature object. Do not twist the lead, bend it excessively, or stretch it. [. . . ] Detail: Wipe the surface clean using a soft cloth dampened with clean water or water containing a small amount of neutral detergent. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket. Remove four screws and take the TV Stand. Rear of the TV Identifying Controls AV2 Headphones jack (p. 19) S-V V L Function select ( Volume / Backlight / Contrast / Brightness / Colour / Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / Tuning mode (p. 19) On / Off switch Store setting (p. 16) Remote control signal receiver R ( Used to store tuning and other function settings ) Switches TV/AV Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On. Quick Start Guide Power lamp ( (On / Off switch in On position) standby : red on : green ) Sound mute On / Off OFF TIMER (p. 15) Switches TV/AV (To watch videos or DVDs) (p. 11) OFF TIMER GUIDE TV/AV Switches TV to On or Standby Programme Guide (p. 10) Select / OK MENU Press (Setup to access the Picture, Sound and ) menus MENU OK EXIT OK button to con¿rm selections and choices. Press after selecting programme positions to quickly change programme. If the external equipment has an aspect adjustment function, set to "4:3". It may take some time for searching, during which time you can watch TV. View theTV picture while searching for a teletext page Teletext automatically updates itself when new information becomes available. Changes to TV screen temporarily Watch TV while waiting for update MENU yellow 108 Appears when updating is completed yellow View the updated page (You cannot change the channel. ) · The news page provides a function that indicates arrival of latest news ("News Flash"). 13 How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV in your own way. Menu list Menu Item Viewing mode Backlight, Contrast, Brightness, Colour, Sharpness Tint Colour balance P-NR 1 OK MENU EXIT Display menu MENU · Displays the functions that can be set (varies according to the input signal) Picture menu Adjust by each viewing mode 2 3 N Select the menu Ma in men u P ic t ur e men u Sound menu S e t up men u (example: Picture menu) select next Select the item Bass select Picture menu Viewing mode Backlight Contrast Brightness Colour Sharpness Tint Colour balance P-NR Dynamic Treble Balance MPX Mode Ambience Sound menu Normal Auto (example: Picture menu) TV 4 Adjust or select Picture menu Viewing mode Backlight Contrast Brightness Colour Sharpness Tint Colour balance P-NR Dynamic OK change store (Required by some functions) AV1 out Teletext Off timer Text language Normal Auto (example: Picture menu) Choose from among alternatives Number and positions of alternatives Setup menu Colour balance Normal To return to TV EXIT Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correction OSD language Colour system Volume correction Tuning menu Changed Adjust using the slide bar Sharpness To return to the previous screen MENU Tuning menu Moved Go to the next screen Access Displays the next screen To reset the setting N 14 Adjustments / Con¿gurations (alternatives) Basic picture mode (Dynamic / Normal / Cinema) Set for each input signal · Viewing mode Dynamic Adjusts backlight, colour, brightness, etc. for each picture mode to suit your taste Backlight Contrast Brightness Colour Sharpness Adjusts tint of image For NTSC signal reception only · Tint Chooses the colour balance of the entire image (Cool / Normal / Warm) Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto) Adjusts the output level of deep bass (High Low) Low) Colour balance Normal P-NR Auto Bass · Adjusts the output level of high-pitch, shrill sound (High Adjusts volume level of right and left speakers Select stereo / monaural (Mono / Stereo) Normally: Stereo Stereo signal cannot be received: Mono M1 / M2: Available while mono signal is transmitted Treble Balance How to Use Menu Functions (picture, sound quality, etc. ) · · · · · · · MPX Stereo Improves sound quality for music and dramas (Music / Speech) Gives a greater spatial effect by using dynamic enhancer (Off / On) Chooses the signal to be transmitted from the TV to output (TV / AV2 / Monitor) Monitor: Image displayed on screen Teletext display mode (TOP (FLOF) / List) (p. 12) Sets the time the unit automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) Selects teletext language (West / East1 / East2) West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian East2: Czech, Hungarian, Lettish, Polish, Rumanian Edits channels (p. 16) Fine tuning of channels (during rain, etc. ) Selects optional colour system depending on video signals (Auto / PAL / SECAM / M. NTSC) Adjusts volume of individual stations Changes language for on-screen displays Selects optional colour system based on video signals in AV mode Adjusts volume for AV mode Mode Ambience AV1 out Teletext Off timer Music Off Monitor TOP Off Text language West Advanced Programme edit Access Access Access Auto setup Manual tuning Fine tuning Colour system Volume correction OSD language Colour system Volume correction Auto Access Auto · In AV mode, the Sound menu and Setup menu give a smaller number of options. 15 Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions. 1 OK MENU EXIT Display the menu MENU 2 3 4 Select "Setup menu" Main m e nu P ictur e m e nu S ound m e nu S etup m e nu next select Edit channels Programme edit Select "Tuning menu" Setup menu AV1 Out Teletext Off timer Text language Tuning menu OSD language Monitor TOP Off East2 Access next select Select the function Tuning menu Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correction Access Delete Add Move Change channel number Change name Lock Change sound system next select TV Auto 5 To exit EXIT Set For Manual tuning, using the buttons on the unit ("Tuning mode" on p. 7) (Press repeatedly until "Tuning mode" appears) or (Access "Manual tuning") Set automatically Auto setup · No data is stored if an Auto setup sequence is interrupted. (Search, Change TV system, Change programme) or (Change programme or start searching channels) Programme number (Àash) Channel number (Àash) Sound system (Àash) CH12 SC1 (Store) (Repeat) 1 Manual tuning -, + : Search TV / AV : Move cursor STR : To store F : To exit 02 STR F -/ Set manually 41 TV / AV To return to TV 99:21 +/ Manual tuning Channel 16 Select the programme number to edit Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Name Programme number 3 FTP select Cursor Edit To delete To add To move red green yellow After con¿rming, press After con¿rming, press To lock red green Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Select destination yellow Select the "Lock" ¿eld Select "On" ("Off" to unlock) · You cannot select the channel with number buttons or the "C" button when locked. To change channel number Programme edit Prog. [. . . ] Occasionally, a few non-active pixels may appear on the screen as a ¿xed point of red, green, blue or black. Please note this does not affect the performance of your LCD. ·· Frequently Asked Questions Technical Information The LCD panel moves slightly when it is pushed with a ¿nger Clattered sound might be heard The remote control does not work · · Are the batteries installed correctly?6) Has the TV unit been switched On? · FAQs, etc. There are some looseness around the panel to prevent the damage to the panel. The panel might move slightly when it is pushed with a ¿nger, and clattered sound might be heard. [. . . ]