User manual PANASONIC STC700AEB

[. . . ] ST-C700A-SQT1004_EB_mst. book 1 ページ ２０１５年６月２２日　月曜日　午前１１時２６分 Operating Instructions Network Audio Player ST-C700A ST-C700A-SQT1004_EB_mst. book 2 ページ ２０１５年６月２２日　月曜日　午前１１時２６分 ST-C700A-SQT1004_EB_mst. book 3 ページ ２０１５年６月２２日　月曜日　午前１１時２６分 Music is borderless and timeless, touching people’s hearts across cultures and generations. Each day the discovery of a truly emotive experience from an unencountered sound awaits. Let us take you on your journey to rediscover music. ST-C700A-SQT1004_EB_mst. book 4 ページ ２０１５年６月２２日　月曜日　午前１１時２６分 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. [. . . ] If a 9th device is paired, the device that has not been used the longest will be replaced. ≥ If you connect another NFC-compatible Bluetooth® device, the previously connected device will be disconnected automatically. ≥ When the connection is established, playback may start automatically depending on the type of device being used. ≥ Connecting by NFC may not work properly depending on the type of device being used. ≥ Do not make an NFC connection in any other way than instructed in the Operating Instructions. Doing so may cause malfunction. 18 ST-C700A-SQT1004_EB_mst. book 19 ページ ２０１５年６月２２日　月曜日　午前１１時２６分 Listening to music stored on a Bluetooth® device 1 Press [NWP]. 2 Press [N INPUT O] below [NWP] repeatedly to select “Bluetooth”. ≥ “Ready” is indicated on the display. ≥ If you press [1/;], this unit will try and connect to the last connected Bluetooth® device. – “Linking” is indicated on the display. Bluetooth® transmission mode You can change the transmission mode to prioritise transmission quality or sound quality. 1 Press [NWP]. 2 Press [N INPUT O] below [NWP] repeatedly to select “Bluetooth”. ≥ If a Bluetooth® device is already connected, disconnect it. 3 Select “ST-C700A” from the Bluetooth® device’s Bluetooth® menu. ≥ The name of the connected device is indicated on the display. 3 Press [MENU]. 4 Press [3, 4] repeatedly to select “Link Mode” and then press [OK]. 4 Start playback on the Bluetooth® device. Operations on the remote control Stop Pause Skip Search Press [∫]. Press [1/;]. ≥ Press again to restart play. 5 Press [3, 4] to select the mode and then press [OK]. Mode 1 Mode 2 Emphasis on connectivity Emphasis on sound quality (default) Press [:] or [9] to skip track. During play or pause, press and hold [6] or [5]. ≥ On the unit: press and hold [:] or [9]. ≥ Select “Mode 1” if the sound is interrupted. Disconnecting a Bluetooth® device 1 Press [NWP]. 3 Press [3, 4] repeatedly to select “Disconnect?” and then press [OK]. ≥ This unit can only be connected to one device at a time. ≥ To use this unit’s remote control with a Bluetooth® device, the Bluetooth® device must support AVRCP (Audio Video Remote Control Profile). Depending on the status of the device, some controls may not work. 4 Press [3, 4] to select “Yes” and then press [OK]. ≥ The Bluetooth® device will be disconnected if a different audio source is selected. 19 ST-C700A-SQT1004_EB_mst. book 20 ページ ２０１５年６月２２日　月曜日　午前１１時２６分 Listening to FM radio You can preset up to 30 channels. Preparation ≥ Press [NWP] and then [N INPUT O] below [NWP] repeatedly to select “FM”. Improving the sound quality 1 Press [NWP]. 3 Press [3, 4] repeatedly to select “FM Mode” and then press [OK]. Automatic presetting 1 Press [NWP]. 3 Press [3, 4] repeatedly to select “Auto Preset” and then press [OK]. 4 Press [3, 4] to select “Mono” and then press [OK]. ≥ “MONO” is displayed. To memorise the setting Continue with steps 2 and 3 of “Manual tuning and presetting”. 4 Press [3, 4] to select “Lowest” or “Current” and then press [OK]. Lowest: To begin auto preset with the lowest frequency (FM 87. 50). Current: To begin auto preset with the current frequency. ≥ Select “Stereo” in step 4 to return to stereo broadcasts. ≥ “Mono” is cancelled if the frequency is changed. Manual tuning and presetting 1 Press [6] or [5] to tune in to the station. ≥ To tune automatically, press and hold the button until the frequency starts changing quickly. RDS broadcasting The unit can display the text data transmitted by the radio data system (RDS) available in some areas. 2 Press [PGM]. 3 Press the numeric buttons to select a preset number. ≥ Do steps 1 through 3 again to preset more stations. ≥ RDS is available only when stereo works in reception. ≥ RDS displays may not be available if reception is poor. [. . . ] Other trademarks and trade names are those of their respective owners. DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ]