User manual PANASONIC SU-G30EB

[. . . ] Through delivering this experience we want to support the development and enjoyment of the world’s many musical cultures. With a combination of our love of music and the vast highend audio experience of the Technics team, we stand committed to building a brand that provides the ultimate emotive musical experience by music lovers, for music lovers. Director Michiko Ogawa 05 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. [. . . ] • If a Bluetooth® device is already connected, disconnect it. ( 31) ■ Listening to music stored on a Bluetooth® device 1 Press [DIGITAL] repeatedly to select “Bluetooth”. • “Ready” is indicated on the display. • You can also select the input source by turning the input selector knob on the unit. 1 Press [DIGITAL] repeatedly to select “Bluetooth”. • You can also select the input source by turning the input selector knob on the unit. 2 Select “SU-G30” from the Bluetooth ® device’s menu. • The name of the connected device is indicated on the display. 2 Press [MENU]. 3 Press [ ], [ ] repeatedly to select “Pairing” and then press [OK]. 4 Press [ ], [ ] to select “Yes” and then press [OK]. • “Pairing” is displayed, and this unit waits for registering. 3 Start playback on the Bluetooth® device. Note • This unit can only be connected to one device at a time. 5 Select “SU-G30” from the Bluetooth ® device’s menu. • The name of the connected device is indicated on the display. • MAC address may be displayed before “SUG30” appears. 6C:5A:B5:B3:1D:0F) Note • If prompted for the passkey, input “0000”. • You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced. 30 Operations during playback Bluetooth® device Stop Pause Skip • Press again to restart play. Bluetooth® transmission mode You can change the transmission mode to prioritise transmission quality or sound quality. Search Note • To use this unit’s remote control with a Bluetooth® device, the Bluetooth® device must support AVRCP (Audio Video Remote Control Profile). Depending on the status of the device, some controls may not work. • When enjoying video contents with this function, the video audio output may not be synchronised. 1 Press [DIGITAL] repeatedly to select “Bluetooth”. • You can also select the input source by turning the input selector knob on the unit. 3 Connect the AC mains lead to this unit. ( 17) 4 Press [ ] to turn this unit on. 5 Press [DIGITAL] repeatedly to select “PC”. • You can also select the input source by turning the input selector knob on the unit. 6 Start playback using the dedicated app “Technics Audio Player” on the connected PC. Note • About supported format, refer to “File format” ( 50) Operations 33 Operations Using analogue audio output device You can input analogue audio signals to this unit and play back music. PHONO LINE IN PHONO EARTH OPT COAX1 COAX2 PC PHONO EARTH DIGITAL IN 1 10 e. g. , Record player *1 Ground wire*2 (not supplied) Audio cable (not supplied) Using analogue digital audio cable 1 Disconnect the AC mains lead. 2 Connect this unit and a record player, etc. 3 Connect the AC mains lead to this unit. ( 17) 4 Press [ ] to turn this unit on. 5 Press [ANALOG] repeatedly to select “LINE” or “PHONO”. • You can also select the input source by turning the input selector knob on the unit. *1: When connecting to a record player with a built-in PHONO equalizer, connect its cable to the analogue audio input terminals (LINE IN). 2: When connecting a record player with a * ground wire, connect the ground wire to the PHONO EARTH terminal of this unit. 6 Start playback on the connected device. 34 AC IN ∼ LAN 0BASE-T / 00BASE-TX SPEAKERS (4∼16Ω) Blu-ray Disc player, etc. Audio cable (not supplied) ■ Minimising audio distortion If audio distortion occurs when using the analogue audio input terminals (LINE IN), setting the attenuator to “On” may be improved. • The factory default is “Off”. 1 Press [SETUP]. 2 Press [ ], [ ] repeatedly to select “Attenuator(LINE)” and then press [OK]. 3 Press [ ], [ ] to select “On” and then press [OK]. Operations 35 Settings Sound adjustment, Other settings The sound effects and other settings can be set up. 1 Press [SETUP]. [. . . ] Mac and OS X are trademarks of Apple Inc. , registered in the U. S. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. [. . . ]