User manual PANASONIC SUR1AE

[. . . ] Book 3 ページ ２０１７年４月１３日　木曜日　午後２時５５分 Music is borderless and timeless, touching people’s hearts across cultures and generations. Each day the discovery of a truly emotive experience from an unencountered sound awaits. Let us take you on your journey to rediscover music. Book 4 ページ ２０１７年４月１３日　木曜日　午後２時５５分 Thank you for purchasing this product. [. . . ] ≥ The factory default is “On”. Setting the sampling frequency You can set an upper limit on the output sampling frequency range. Please note that the range that can be processed differs depending on the amplifier or D/A converter. For details, refer to the operating instructions of the connected device. To disable the digital audio output: Press [3, 4] repeatedly to select “Digital Output” and then press [OK]. To disable the analogue audio output: Press [3, 4] repeatedly to select “Analog Output” and then press [OK]. To disable the system terminal output (SE-R1): Press [3, 4] repeatedly to select “Digital Link” and then press [OK]. ‰ To enable the output again, select “On”. ‰ Depending on the music source that you play back, the applied setting may be less effective. ‰ Depending on the music source that you play back, it may not be possible to achieve the desired audio quality and sound field effect. ≥ Both Re-master and Direct mode cannot be set to “On”. ‰ When “Digital Output”, “Analog Output” and “Digital Link” are set to “Off”, no sound will be output. ‰ When a headphone plug is connected, even if “Analog Output” is set to “Off”, it is not possible to disable the analogue audio output. ‰ It may take some time to output audio when you have adjusted the audio quality. Book 21 ページ ２０１７年４月１３日　木曜日　午後２時５５分 Others Sleep timer The sleep timer can switch the unit to standby mode after a set time. Auto off function English This unit is designed to conserve its power consumption and save energy. The unit will turn to standby mode automatically if there is no sound and it is not being used for approximately 20 minutes. Each time you press the button: “30 minutes” "# “60 minutes” "# “90 minutes” "# “120 minutes” ^"""""""""""""" “Off” ! """""""""""""n To cancel this function 1 Press [SETUP]. ‰ You can also set the sleep timer by selecting “SLEEP” using the menu screen. ‰ The auto off function works unless you turn it off, even if you turn off and on this unit. Book 22 ページ ２０１７年４月１３日　木曜日　午後２時５５分 Firmware updates Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. [. . . ] ( – Se till att nätverket är anslutet till internet. ‰ Se till att enheten och apparaten är anslutna till samma nätverk. Se till att det trådlösa nätverket är anslutet till Internet. Kontrollera om servern är ansluten till samma nätverk som den här enheten och försök ansluta till den här enheten igen. [. . . ]