User manual PANASONIC SU-R1EG

[. . . ] Book 3 ページ ２０１４年１２月３日　水曜日　午前８時５７分 Music is borderless and timeless, touching people’s hearts across cultures and generations. Each day the discovery of a truly emotive experience from an unencountered sound awaits. Let us take you on your journey to rediscover music. Book 4 ページ ２０１４年１２月３日　水曜日　午前８時５７分 Thank you for purchasing this product. [. . . ] 5 Operate the device to be used for playback. Book 20 ページ ２０１４年１２月３日　水曜日　午前８時５７分 Sound adjustment The following sound effects can be added to the audio output. Listening to more naturalsounding audio (Re-master) Re-mastering expands the playback band and achieves a higher bit depth to reproduce natural and expansive sound close to original music. ≥ The factory default is “Off”. Minimising audio distortion If audio distortion occurs when using the analogue audio input terminals, set the attenuator to “On”. Direct mode This unit can transmit input signals without passing them through its digital signal processor (DSP), via the shortest possible path. Disabling audio output Disabling the audio output of unused terminals minimises noise and allows playback in higher audio quality. ≥ The factory default is “On”. Setting the sampling frequency You can set an upper limit on the output sampling frequency range. Please note that the range that can be processed differs depending on the amplifier or D/A converter. For details, refer to the operating instructions of the connected device. To disable the digital audio output: Press [3, 4] repeatedly to select “Digital Output” and then press [OK]. To disable the analogue audio output: Press [3, 4] repeatedly to select “Analog Output” and then press [OK]. To disable the system terminal output (SE-R1): Press [3, 4] repeatedly to select “Digital Link” and then press [OK]. ‰ To enable the output again, select “On”. ‰ Depending on the music source that you play back, the applied setting may be less effective. ‰ Depending on the music source that you play back, it may not be possible to achieve the desired audio quality and sound field effect. ‰ When a headphone plug is connected, even if “Analog Output” is set to “Off”, it is not possible to disable the analogue audio output. ‰ It may take some time to output audio when you have adjusted the audio quality. Book 21 ページ ２０１４年１２月３日　水曜日　午前８時５７分 Others Sleep timer The sleep timer can turn the unit off after a set time. Network standby This unit can turn on automatically from standby mode when this unit is selected as the AirPlay/DLNA player. Each time you press the button: “30 minutes” "# “60 minutes” "# “90 minutes” "# “120 minutes” ^"""""""""""""" “Off” ! [. . . ] ( – Se till att nätverket är anslutet till internet. ‰ Se till att enheten och apparaten är anslutna till samma nätverk. Se till att det trådlösa nätverket är anslutet till Internet. Kontrollera om servern är ansluten till samma nätverk som den här enheten och försök ansluta till den här enheten igen. [. . . ]