User manual PANASONIC SU-X120

[. . . ] As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not expose batteries or apparatus with batteryinstalled to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. [. . . ] ­ Signals with more than 5. 1 channel are being received (except PLIIz). · When one of the sound fields for music is selected, no sound is output from the subwoofer if all the speakers are set to "Large" on the Speaker Settings menu. However, the sound will be output from the subwoofer if ­ the digital input signal contains LFE signals. ­ the front or surround speakers are set to "Small". ­ the sound field for movie is selected. ­ "Portable Audio" is selected. · The effects provided by the virtual speakers may cause increased noise in the playback signal. · When listening with sound fields that employ the virtual speakers, you will not be able to hear any sound coming directly from the surround speakers. Enjoying Surround Sound x HP DIRECT (HP (Direct)) This mode is selected automatically if you use headphones when "Analog Direct" is selected. Outputs the analog signals without processing by the equalizer, sound field, etc. Tips · You can identify the encoding format of DVD software, etc. , by looking at the logo on the package. · Dolby Pro Logic IIx and Dolby Pro Logic IIz decoding are effective when multi channel signals are input. · Sound fields with D CS marks use DCS technology. We recommend that you connect the receiver to products featuring "BRAVIA" Sync. Note Depending on the connected component, the Control for HDMI function may not work. Refer to the operating instructions of the component. Preparing for the "BRAVIA" Sync The receiver is compatible with the "Control for HDMI-Easy Setting" function. · If your TV is compatible with the "Control for HDMI-Easy Setting" function, you can set the Control for HDMI function of the receiver and playback components automatically by setting the TV (page 70). · If your TV is not compatible with the "Control for HDMI-Easy Setting" function, set the Control for HDMI function of the receiver, playback components and TV individually (page 71). If your TV is compatible with the "Control for HDMI-Easy Setting" function The Control for HDMI function of the receiver can be turned on simultaneously by turning on the Control for HDMI function of the TV. 1 Connect the receiver, TV and playback components via HDMI connection (page 27). (The respective components must be compatible with the Control for HDMI function). 2 Turn on the receiver, TV and playback components. 3 Turn the Control for HDMI function of the TV on. The Control for HDMI function of the receiver and all the connected components are turned on simultaneously. When the setup is completed, "COMPLETE" will appear. For details on setup of the TV, refer to the operating instructions of your TV. 70GB If your TV is not compatible with the "Control for HDMI-Easy Setting" function GUI MODE V/v/b, Notes · Before you do the "Control for HDMI-Easy Setting" from the TV, be sure to turn on the TV, connected components and receiver. · If the playback components cannot function after you have made the settings for "Control for HDMIEasy Setting", check the Control for HDMI setting on your TV. · If the connected components do not support "Control for HDMI-Easy Setting", you need to set the Control for HDMI function for the connected components to on before you perform the "Control for HDMI-Easy Setting" from the TV. MENU 1 Perform the steps given in "If your TV is compatible with the "Control for HDMIEasy Setting" function" (page 70). 2 Press GUI MODE. After "MENU ON" appears on the display for a while, "GUI" appears and the GUI menu appears on the TV screen. [. . . ] Move the antenna to the place where the condition is good. · Check that you subscribed to the satellite radio service you want (page 57). RDS does not work. b) · Make sure that you are tuned to an FM RDS station. The RDS information that you want does not appear. b) · Contact the radio station and find out whether they actually provide the service in question. [. . . ]