User manual PANASONIC SU-X520D

[. . . ] And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. WARNING Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. For customers in the United States This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] 2 While holding down MODE +, press ?/1. Frequency (Hz) Frequency (Hz) Frequency (Hz) Advanced Adjustments and Settings You can store up to 5 different equalizer settings in the equalizer bank (EQ [1]­[5]) and apply them by pressing EQ BANK. "S. F Initialize" appears in the display and all sound fields are reset to the initial settings. 1 Start playing a source encoded with multi channel surround effects (DVD, etc. ). 2 Press EQ BANK repeatedly to select the equalizer you want to adjust (EQ [1]­[5]). 3 Press EQ. The EQ button lights up and the EQ menu appears in the display. 4 Press the cursor buttons ( select the parameter. or ) to For details, see "EQ menu parameters" below. 5 While monitoring the sound, turn the jog dial to adjust the selected parameter. 6 Repeat steps 4 and 5 to adjust the other items. continued 45GB Adjusting the equalizer (continued) EQ menu parameters x FRONT BASS XXX. X dB (Front speaker bass level) x FRONT MID XXX. X dB (Front speaker midrange level) x FRONT TREBLE XXX. X dB (Front speaker treble level) x CENTER BASS XXX. X dB (Center speaker bass level) x CENTER MID XXX. X dB (Center speaker midrange level) x CENTER TREBLE XXX. X dB (Center speaker treble level) x SURROUND BASS XXX. X dB (Surround speaker bass level) x SURROUND TRE. XXX. X dB (Surround speaker treble level) x SUR. BACK BASS XXX. X dB (Surround back speaker bass level) x SUR. BACK TRE. XXX. X dB (Surround back speaker treble level) To apply the stored equalizer Press EQ BANK repeatedly to select EQ [1]­[5]. Select "EQ [OFF]" to turn off equalization. Clearing Stored Equalizer Settings 1 Press EQ BANK repeatedly to select the equalizer (EQ [1]­[5]) you want to clear. 3 Press the cursor buttons ( "PRESET CLEAR". or ) to select 4 Turn the jog dial to select "YES", then press ENTER. "Are you sure?" appears in the display. 5 Turn the jog dial to select "YES", then press ENTER. The adjusted contents of the selected equalizer bank are cleared. For advanced EQ menu adjustments Use the CUSTOMIZE menu and set "MENU EXPAND" to "ON" to enable advanced adjustments. For details on "MENU EXPAND", see page 47. For details on how to set the items, see page 55. Initial setting: 0 dB You can adjust from ­10 dB to +10 dB in 0. 5 dB steps. 46GB Advanced settings Using the CUSTOMIZE menu to adjust the receiver You can adjust various receiver settings using the CUSTOMIZE menu. x 2CH MODE (2 channel decoding mode) 1 Press CUSTOMIZE. The CUSTOMIZE button lights up and the CUSTOMIZE menu appears in the display. 2 Press the cursor buttons ( select the parameter. or ) to You can use the CUSTOMIZE menu to set the 2 channel decoding mode (page 38). You can set this parameter only when NORMAL SURROUND or AUTO DECODING* is selected. In the Cinema Studio EX mode, this parameter is always set to "PRO LOGIC" and cannot be changed. · OFF Lets you turn off the 2 way remote control system. that is also compatible with the 2 way remote control system, together with this receiver, select the component for which you use the 2 way remote control system. Then set the 2 way remote control system for the component to "ON". For other components, set the 2 way remote control system to "OFF". x T. TONE (Test tone mode) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks. · AUTO Automatically switches the input mode between DTS, Dolby Digital, PCM, or MPEG2. · PCM Decodes all the input signals as PCM signals. If a Dolby Digital, DTS, or MPEG (etc. ) signal is input, no sound is output. When set to "AUTO", and the sound from the digital audio jacks (for CD, etc. ) is interrupted when playback starts, set to "PCM". Lets you select the test tone output mode (page 26). · NORMAL Lets you output the test tone from each speaker in sequence. · PHASE NOISE Lets you output the test tone from two adjacent speakers at a time in sequence. · PHASE AUDIO Lets you output the source sound instead of the test tone from two adjacent speakers at a time in sequence. x INSTALLER MODE (RS232C control) x 12V TRIG. MAIN (12 V trigger for the main room) x 12V TRIG. 2ND (12 V trigger for the 2nd room) x 12V TRIG. 3RD (12 V trigger for the 3rd room) (STR-DA7ES only) For details, see "Custom install mode" on page 57. 48GB x OSD COLOR (Color of the on-screen display) Lets you select the color of the on-screen display. [. . . ] · Select the source component with FUNCTION control. · When recording from a digital component, make sure the INPUT MODE is set to ANALOG 2CH FIXED (page 42) before recording with a component connected to the analog MD/DAT or TAPE terminals. · When recording from a digital component, make sure the INPUT MODE is set to COAXIAL FIXED or OPTICAL FIXED (page 42) before recording with the component connected to the DIGITAL MD/DAT OUT terminals. · Set "D. POWER" to "ALWAYS ON" when ANALOG DIRECT is selected, for the digital audio signal is not output in "AUTO OFF" setting. 76GB To connect an LD player via an RF demodulator Remote control The remote does not function. · Connect the LD player to the RF demodulator, then connect the RF demodulator's optical or coaxial digital output to the receiver's DVD/LD OPTICAL IN or COAXIAL jack. [. . . ]