User manual PANASONIC SU-X999

[. . . ] Before connecting other components, be sure to turn off and unplug the receiver. Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any question or problem concerning your receiver, please consult your nearest Sony dealer. [. . . ] You'll most likely want to preset the receiver with the radio stations you listen to often so that you don't have to tune in the station every time. the receiver can store a total of 30 FM or AM stations. You can store the stations on preset numbers combining three characters (A, B, C) and numbers (0 - 9). For example, you can store a station as preset number A1, B6 or C9, etc. You can tune directly to a preset station by entering its preset number. If you don't know which stations are preset on which numbers, you can tune by scanning the preset stations. Press SHIFT to select a character (A, B or C), then press the number on the remote. For example, to tune in the station preset as A7, select A and then press 7. you can tune by scanning the preset stations First press TUNER and then press PRESET/PTY SELECT + or ­ to select the station you want. Each time you press the buttons, the preset numbers change as follows: If you are not familiar with how to tune in a station, see "Receiving Broadcasts" on the previous page. Do steps 4 to 6 before "MEMORY" goes out. Before you begin, make sure you've connected all components properly. For example, turn on the TV and TV tuner. You can replace audio while editing a video tape At the point you want to start adding different sound, press another function button (for example, CD) and start playback. Playback component (programme source) l: Audio signal flow Recording component (MD deck, Tape deck, VCR) You cannot record the audio signal during DVD/MULTI CH mode. You can record on a MiniDisc or cassette tape using the receiver. See the instruction manual of your MD deck or tape deck if you need help. You can set the receiver to turn off automatically at a time you specify. For example, insert a CD into the CD player. Insert a blank disc or tape into the recording deck and adjust the recording level, if necessary. Start recording on the recording deck and then start playing the component. Press SLEEP on the remote while the power is on. [. . . ] The test tone is output from the front L (left), centre, front R (right), and surround speakers in succession. Compared with the former Dolby Surround system, Dolby Pro Logic Surround reproduces left-to right panning more naturally and localizes sounds more precisely. To take full advantage of Dolby Pro Logic Surround, you should have one pair of surround speakers and a centre speaker. These jacks are used to input multi channel audio signals, allowing you to enjoy 5. [. . . ]