User manual PANASONIC SV-AP10U

[. . . ] R Digital Photo Printer Operating Instructions Model No. SV-AP10U Before use, please read these instructions completely. Please retain this manual for continuing reference. For USA assistance. please call:1-800-211-PANA(7262) or send e-mail to:consumerproducts@panasonic. com For Canadian assistance. [. . . ] Desktop resolution of 800X600 dots or higher. Disk drive: CD-ROM drive Ports: USB Terminal (Up to 12 Mbps) Other requirements: Mouse Remove the memory card when using this printer as the printer for your PC. A USB hub or USB card used for connection is not recommended for normal operation. The names of the products you are using may differ from the names given in the text. Depending on the operating environment and other factors, the contents of the screens used in these instructions may not necessarily match what you will see on your screen. Although the screens in these Operating Instructions are shown in English for the sake of example, other languages are supported as well. Microsoft® Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. 31 Connecting and Operating with a personal computer Installing the Printer Driver Installing this printer driver allows the Photo Printer to be used as a fullcolor printer. For Windows XP 1 Turn on the personal computer and install the supplied CD-ROM into the CD-ROM drive. 2 Turn on the Photo Printer. 3 Connect the Printer to the PC using the USB connection cable. The [Found New Hardware Wizard] screen appears. 4 Click the [Next] Button. Confirm that the item [Install the software automatically] is selected. 5 Click the [Finish] Button when the Printer Driver Software is detected. The driver setup is completed. When the Printer Driver Software is not detected, please refer to page 35. Please also read "Notes on Installation of Printer Driver" ( 39) carefully. 4 5 32 Connecting and Operating with a personal computer Installing this printer driver allows the Photo Printer to be used as a fullcolor printer. 4, 6 For Windows Me 1 Turn on the personal computer and install the supplied CD-ROM into the CD-ROM drive. 2 Turn on the Photo Printer. 3 Connect the Printer to the PC using the USB connection cable. The [Add New Hardware Wizard] screen appears. Depending on your PC environment, step 4 and 5 may be skipped. If this is the case, proceed from step 6. 5 4 Click the [Next] Button. 5 Click the [Finish] Button when the Printer Driver Software is detected. 6 [Add New Hardware Wizard] screen appears again. Click the [Next] Button. 7 Select [No] when the [Add Printer Wizard] screen appears. 7 Select [Yes] to set as the default printer. After clicking [Finish], the message [File *****. DLL is not found] can be displayed depending on the environment of PC. Many PCs may install this file on the Hard Disk. Click [Refer] and select [C:\windows\option\cabs]. 8 Click the [Finish] Button. The driver setup is completed. When the Printer Driver Software is not detected, please refer to page 35. Please also read "Notes on Installation of Printer Driver" ( 39) carefully. 8 33 Connecting and Operating with a personal computer 4, 9 Installing the Printer Driver (Cont. ) For Windows 98SE/2000 1 Turn on the personal computer and install the supplied CD-ROM into the CD-ROM drive. 2 Turn on the Photo Printer. 3 Connect the Printer to the PC using the USB connection cable. 5 The [Add New Hardware Wizard] screen appears. Depending on your PC environment, step 4 and 8 may be skipped. [. . . ] Customer's in Puerto Rico, please ship or carry in to location below ("Service in Puerto Rico"). Service in Puerto Rico Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory Servicenter: Ave. 9. 5 , San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Phone (787) 750-4300 Fax (787) 768-2910 As of January 2002 54 Instalación Disposición vertical Instalación y conexiones (ESPAÑOL) Instalación Tener cuidado de instalar el sostén si se elige la disposición vertical; asimismo los pies cuando se elige la disposición horizontal. Instalación en disposición vertical 1 Instalar el sostén en el alojamiento tal como se muestra en 2 la figura. Enroscar el tornillo y sujetar la unidad principal y el sostén. Instalación en disposición horizontal 1 Unir los pies para la disposición horizontal en los cuatro Disposición horizontal ángulos del lado que no tiene una abertura de la unidad principal. [. . . ]