User manual PANASONIC SV-AV10

[. . . ] SD Multi AV Device Operating Instructions Model No. SV-AV10E/B/EN Before use, please read these instructions completely. VQT9775 Contents Information for Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Caution for AC mains lead (SV-AV10B only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (Backlight is the light that shines from behind a recording subject. ) - VOL + 1 Set the Operation Mode to [REC>>MPEG4] or 1 PUSH/SET SELECT PLAY MPEG4 PICTURE [REC>>PICTURE] 1. 2 Move the Jog Lever up for about 1 second. The [ª] Indication 2 is displayed. VOICE To Resume Normal Recording Move the Jog Lever up for about 1 seconds. When the Backlight Compensation Function is activated, the entire screen becomes brighter. Turning the power OFF will release this function. It is not possible to use Horizontal Stripes Reduction Mode when this mode is set to ON. The backlight may not be sufficiently compensated in dark places. The Backlight Compensation Function cannot be set or released while recording. 2 Adjusting White Balance The SD Multi AV Device adjusts White Balance automatically. However, depending on the scene or light condition, the Automatic White Balance may not be able to bring out natural colours. In such case, the white balance can be adjusted manually. 1 1, 3 MODE/ VOL 1 Set the Operation Mode to [REC>>MPEG4] or [REC>>PICTURE] 1. - VOL + 2 Point the SD Multi AV Device at a full-screen white subject (e. g. white paper). 3 Keep pressing the centre of the Jog Lever until the [1] Indication 2 is displayed. 1 PUSH/SET SELECT PLAY MPEG4 PICTURE REC To Resume Automatic Adjustment Press down the centre of the Jog Lever until the [1] Indication 2 disappears. You may not be able to achieve correct White Balance adjustment manually under weak illumination. (In this case, the [1] Indication flashes. ) Turning the power OFF will release the adjusted White Balance setting. This mode cannot be set or released while recording. Adjustment of White Balance is effective under the following conditions. -When recording under reddish lighting (halogen light bulb, incandescent light bulb, etc. ). -When recording a picture of mono-tone colour. -When recording under multiple lightings VOICE 2 1 22 Erasing the Files Recorded on a Card / MENU 2 3, 4 Using SD Multi AV Device, you can erase the files recorded on a Card. After the file is erased, it cannot be restored. 1 Play back the file to be erased or let it pause. - VOL + (l 15, 17 , 19) 2 Press the [MENU] Button. The [CARD EDITING] screen appears 1. Except for the still picture mode, [DPOF SETTING] and [SLIDE SHOW] is not displayed. 3 3 Press the Jog Lever downwards/upwards to select 1 [ERASE CARD FILE] and press down the centre of the Jog Lever 3 A verification message appears 2. 4 Move the Jog Lever up or down to select [YES] and ERASE CARD FILE FILE PROTECTION DPOF SETTING CHECK EXIT press down the centre of the Jog Lever 3 The selected file is erased from the Card. If [NO] is selected, the file selection is cancelled. To abort the [CARD EDITING] screen, select [RETURN]. ª To erase All Files 1 Set [ERASE ALL FILES] on the [CARD EDITING] 4 Menu 2 to [YES]. A verification message appears. ERASE FILE NO RETURN YES 2 Select [YES]. 3 Press the [MENU] Button twice. Erased files cannot be restored. This SD Multi AV Device cannot erase any music files (MPEG2-AAC and MP3) (l 20). [. . . ] If the power still remains after 5 seconds passed, remove the battery or unplug the AC adapter. 7: Sound is not heard with the Earphone connected while a still picture is played back. 7: Sound is not presented in the Still Picture mode (recording or playing back of still pictures). 8: How do I send an MPEG4 moving picture recorded as e-mail? [. . . ]