User manual PANASONIC SV-AV30

[. . . ] R SD Multi AV Device Operating Instructions Model No. SV-AV30U Before use, please read these instructions completely. For USA assistance. please call:1-800-211-PANA(7262) or send e-mail to:consumerproducts@panasonic. com For Canadian assistance. please call:1-800-561-5505 or visit us at www. panasonic. ca VQT0C31-2 Before opening the CD-ROM package, please read the following. End User License Agreement You ("Licensee") are granted a license for the Software defined in this End User License Agreement ("Agreement") on condition that you agree to the terms and conditions of this Agreement. [. . . ] If the SD Multi AV Device is sprayed with such chemicals, its body may be deformed and the surface finish may peel off. Do not keep rubber or plastic products in contact with the SD Multi AV Device for a long period of time. Do not use benzine, thinner or alcohol for cleaning the SD Multi AV Device. The camera body may be deformed and the surface finish may peel off. Before cleaning, detach the Battery or pull out the AC Main Lead from the AC Main socket. Wipe the SD Multi AV Device with a soft dry cloth. To remove stubborn stains, wipe with a cloth that is soaked in detergent diluted with water, and afterward, finish wiping with a dry cloth. 52 After use, be sure to take the Memory Card out and detach the Battery from the SD Multi AV Device or pull out the AC Main Lead from AC Main socket. If the Battery is used in an extremely cold environment, the Battery may only operate for approx. If the Battery becomes extremely hot, a protective function may operate, and the Battery may become unusable for a while. Remove the battery if the device is left unused for a long time. The temperature of the SD Multi AV Device and the battery may rise while charging the battery. Such rise of temperature does not indicate a fault. Do not install, remove, plug or unplug the battery or power cord while the power is on. ª About the LCD Monitor In a place with drastic temperature changes, condensation may form on the LCD Monitor. If your SD Multi AV Device is extremely cold when you turn its power on, the image on the LCD Monitor will be slightly darker than usual at first. However, as the internal temperature increases, it goes back to the normal brightness. Extremely high precision technology is employed to produce the LCD Monitor screen featuring a total of approximately 200, 000 pixels. The result is more than 99. 99% effective pixels with a mere 0. 01% of the pixels inactive or always lit. However, this is not a malfunction and does not affect the recorded picture. ª About the Lens Do not touch the lens. Wipe the SD Multi AV Device with a soft dry cloth when the lens becomes unclean. When the Lens is Fogged Up, turn off the SD Multi AV Device and leave the SD Multi AV Device in this condition for approx. When the lens temperature becomes close to the ambient temperature, the fog disappears naturally. Be careful not to touch the lens when picking up the SD Multi AV Device from the supplied Wearable carry case. ª Optimal Use of the Battery Battery Characteristics This Battery is a rechargeable lithium ion battery. Its ability to generate power is based upon the chemical reaction that takes place inside it. [. . . ] Only) For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquires please contact: 1-800-211-PANA(7262), Monday-Friday 9am-9pm Saturday-Sunday 9am-7pm, EST. or send e-mail: consumerproducts@panasonic. com Web Site: http://www. panasonic. com You can purchase parts, accessories or locate your nearest servicenter by visiting our Web Site. Accessory Purchases: 1-800-332-5368 (Customer Orders Only) Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032 (6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST) (Visa, MasterCard, Discover Card, American Express, Check) Product Repairs Centralized Factory Servicenter Panasonic Services Company 1705 N. Randall Road, Elgin, IL 60123-7847 Attention: SD Products Repair Please carefully pack and ship, prepaid and insured, to the Elgin Centralized Factory Servicenter. Customer's in Puerto Rico, please ship or carry in to location below ("Service in Puerto Rico"). MAIL TO : Service in Puerto Rico Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory Servicenter: Ave. [. . . ]