User manual PANASONIC SV-AV100

[. . . ] SD Video Camera Operating Instructions Model No. SV-AV100 Before use, please read these instructions completely. B VQT0F69 Before opening the CD-ROM package, please read the following. b=r=i=^ You ("Licensee") are granted a license for the Software defined in this End User License Agreement ("Agreement") on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co. , Ltd. ("Matsushita"), its distributors or dealers from which you made the purchase. Article 1 License Licensee is granted the right to use the Software, including the information recorded or described on the CD-ROM, instruction manuals, and any other media provided to Licensee (collectively "Software"), but all applicable rights to patents, copyrights, trademarks and trade secrets in the Software are not transferred to Licensee. Article 2 Use by a Third Party Licensee may not use, copy, modify, transfer or allow any third party, whether free of charge or not, to use, copy or modify the Software, except as expressly provided for in this Agreement. Article 3 Restrictions on Copying the Software Licensee may make a single copy of the Software in whole or in part solely for back-up purpose. Article 4 Computer Licensee may use the Software only on one computer, and may not use it on more than one computer. Article 5 Reverse Engineering, Decompiling or Disassembly Licensee may not reverse engineer, decompile, or disassemble the Software, except to the extent either of them is permitted under law or regulation of the country where Licensee resides. [. . . ] If you use Windows Me/98SE, check that the Card Access Lamp is out, then remove the USB Cable. (Keep the SD Video Camera turned on. ) N N O P Double click the in task tray. Hardware disconnect dialogue box appears. Select [Panasonic SD-Video CAMERA USB Interface] and click [Stop]. Click [OK]. Click [OK], and you can safely disconnect the cable. O f===== ~=Er~F 1 2 3 Select [Start] (>>[Settings]) >>[Control Panel]. Select the software to be uninstalled and click [Change/Remove]. P Uninstalling steps may vary depending on the OS. Please refer to the user manual of your OS. SN `=~=c== =j=`~=== =~=m` When the Memory Card with data recorded by the SD Video Camera is inserted into a personal computer, folders will be displayed as in the figure. Use the MediaStage for AV100 for operating files in the Memory Card. (l 82) [DCIM]: [MISC]: [SD_VIDEO]: The images (IMGA0001. JPG etc. ) in this folder are recorded in the JPEG format. ([100-0001] or similar indication is displayed on the SD Video Camera. ) Files in which DPOF Data has been set to the image are in this folder. Slide show data created by MediaStage for AV100 are in this folder. (AUTPLAY0. MRK etc. ) MPEG2 moving pictures (MOV001. MOD etc. ) and MPEG4 moving picture is recorded in ASF format (MOL001. ASF etc. ). For other notes, see page 83. SO l `~==J=~= =~~==~= ~ This built-in battery is used for the memory of date and time. If [0] indicator is displayed when the power is on, the built-in battery may be exhausted. Charge using the following procedure: N N O Take the battery out and plug in the AC adaptor. (l 10) Turn the power off and leave the SD Video Camera as it is for approx. 12 hours. O The built-in battery can be used for about 6 months by 1 charge. (It changes with operating. ) After recharging the built-in battery, adjust the date and time. (l 20) r==l~= b~ While recording or playing back on an SD Video Camera, the sound can be heard using optional earphones. 1 ] 1 Plug the Earphone terminal in to the [ Socket. If the volume while playing back is loud or soft, you can adjust the volume by using the Volume Adjustment Lever on the SD Video Camera, or the Volume Adjustment Button on the Remote Controller. (Adjustment of volume cannot be performed while recording. ) (l 29) If you use earphones be sure to use a thing with length of cord less than 3 metres. SP r=^ Inserting the Button-type Battery Before using the Remote Controller, insert the supplied button-type battery. N 1 N O P While pressing the Stopper 1, pull out the Battery Holder. Insert the button-type battery with the imprint (r) facing upward. Insert the Battery Holder into the Remote Controller. When the button-type battery becomes weak, replace it with a new CR2025 battery. (A battery is normally expected to last about one year, however, it depends on operation frequency. ) Be sure to match the poles properly when inserting the battery. OIP Warning "THE LITHIUM BATTERY IS A CRITICAL COMPONENT (TYPE NUMBER CR2025 MANUFACTURED BY PANASONIC). IT MUST NEVER BE SUBJECTED TO EXCESSIVE HEAT OR DISCHARGE. IT MUST THEREFORE ONLY BE FITTED IN EQUIPMENT DESIGNED SPECIFICALLY FOR ITS USE. [. . . ] 1: Press the [RESET] Button on the SD Video Camera with a pointed object. However, a date/time setup is memorized. ) If this does not solve the problem, first disconnect the power supply and wait for a minute or so, and then reconnect the power supply to turn the power back on. (If the above operation is performed when the Access Lamp of Memory Card Slot is lit, the data on the Card may be damaged. ) 5: 2: 2: 3: 3: 4: 4: How do I send an MPEG4 moving picture recorded as e-mail?Capture the moving picture data recorded on the SD Video Camera onto a personal computer and attach it to an e-mail to send it. [. . . ]