User manual PANASONIC SX-3800B

[. . . ] If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/ YELLOW. [. . . ] · This setting also functions for the song playback volume. GENERAL 3. Use the TRANSPOSE/PROGRAM buttons to select the chord mode (1 Finger, Fingered, Pianist). 1. Press the APC/SONG VOLUME button to turn it on. APC/SONG VOLUME TRANSPOSE PROGRAM · The display looks similar to the following. · Perform this operation while the PROGRAM indication is flashing on the display. After a few seconds, the display returns to the previous display. GENERAL 4. Start · · · · · · the rhythm. 2. Use 5. Specify a chord. If the 1 Finger or Fingered mode was selected, specify the chord on the keyboard section to the left of the split point (C3). (Refer to pages 41 and 44. ) An accompaniment pattern in the specified chord is automatically played. The specified chord is shown in the CHORD section on the display. When you use the fill-in, intro and ending patterns, the automatic accompaniment is also used in these patterns. Once a chord is specified, it continues to play even when the keys are released, until you specify another chord. stop the automatic accompaniment, press the START/STOP button. the TEMPO/PROGRAM buttons to adjust the volume (0 to 10). · A setting of 10 is the normal volume. · Perform this operation while the PROGRAM indication is flashing on the display. After a few seconds, the display returns to the previous display. Play the keyboard to record your performance. · If you record a performance without the rhythm, begin your performance without pressing the START/STOP button. Recording begins immediately when you play the keyboard. · The measure number is shown on the display. 1 EASY REC: Your performance, including the automatic accompaniment, is recorded. · All the previously recorded contents are erased. 2 MELODY: Your performance of those parts selected in the CONDUCTOR is recorded. 3 APC REAL: The automatic accompaniment (specified chords) only is recorded. · Be sure to turn on the AUTO PLAY CHORD button before beginning recording. Also note that recording in this mode should be completed before starting to record in the MELODY mode. 4 APC STEP: The chord progression is recorded one chord at a time. (Refer to page 34. ) TRANSPOSE TEMPO measure number REC XBS R1 R2 L C 6. When you have finished recording, press the START/STOP button. [. . . ] · The DRUMS volume is set to the minimum level. Use the balance buttons to set the DRUMS volume to an appropriate level. (Refer to the page 42. ) · The 091 CLASSIC BALLAD rhythm is selected. This rhythm does not sound unless the AUTO PLAY CHORD is used. [. . . ]