User manual PANASONIC SX-3900A

[. . . ] Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. [. . . ] On the RECORD MEMORY display, press the OK button. · The display looks similar to the following. 2. Use the KEY and buttons to set the key. Use the CHORD and buttons to set the chord type (Maj/Min). 4. Press the CLEAR THE ENTIRE PATTERN button. · The display looks similar to the following. 3. When you have finished making the settings, press the EXIT button. 5. Press the YES button. · All the data for the selected pattern is erased. 6. Use the MEASURE and buttons to specify the number of measures in your new rhythm pattern (1 to 16). 7 Use the TIME SIGNATURE and buttons to specify the meter of the pattern (1/4 to 8/4). · When the settings for the MEASURE and TIME SIGNATURE of the INTRO or ENDING patterns are changed, the Maj and Min settings change at the same time. 8. Press the OK button. 111 QQTG0671 Composer Part V Composer Recording procedure · PITCH BEND, MODULATION (except for the DRUMS part) effects are also recorded. The current measure number is shown on the display as "MEASURE=". · Record the performance in C major for correct chord progressions during playback. Follow the KEY SETTING procedure if you wish to record the performance in a different scale. 112 QQTG0671 Part V Composer 5. Use the buttons below the display to switch to a different recording part, and proceed to record each part in turn. 6. When you have finished recording the rhythm, turn off the PROGRAM MENUS button. Chord Modify Change For data that has already been recorded, you can select the type of pattern progression for the bass and accomp parts. · This function cannot be used for the INTRO and ENDING patterns. 1. On the RECORDING display, press the CHORD MODIFY CHANGE button. · The display looks similar to the following. 2. Use the PART L and M buttons to select the part you wish to set. 3. Use the GROUP and CHORD MODIFY TYPE and buttons to select the corresponding progression type. · If a progression type for which the note name is displayed (in C key) was selected for the chord group, played notes which are not displayed are changed to notes which are displayed. 4. [. . . ] It is not possible to insert over 16 measures in a PATTERN. It is not possible to set the start measure to the measures you set to copy. 56 58 62 63 64 65 66 67 68 69 70 71 204 QQTG0671 Index A ACCORDION REGISTER . . 46 45 12 61 64 29 N NOTE EDIT . 86 206 QQTG0671 Specifications SX-3900A KEYBOARD SOUND GENERATOR MAX. [. . . ]