User manual PANASONIC SX-4000R

[. . . ] Check for the ASTA mark on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. [. . . ] On the FROM side, use the SONG and buttons to select the song number you wish to copy from. 2. On the TO side, use the SONG and buttons to select the song number to copy to. 3. Press the OK button. · The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function. TRACK COPY 2. On the COPY & PASTE display, select a function. Copy the recorded data from specific tracks of a song. 3. (See below. ) · During the editing procedure, if the indicator for the TEMPO/PROGRAM is lit, you can use the TEMPO/PROGRAM dial for the editing function. SONG COPY Copy all the recording data of a song to a specific song memory. 1. Specify the track you wish to copy from. · On the FROM side, use the SONG and buttons and TRACK and buttons to specify a track. · If ALL is selected, all the tracks of the specified song number will be copied. 2. Specify the track you wish to copy to (TO side). 3. Press the OK button. · The confirmation display appears. CONTROL: Only control data (volume, effect and other panel settings as well as selection changes) is erased. Sequencer MEASURE INSERT Insert specified measures at a specified point. · The length of the performance accordingly increases by the number of inserted measures. 5. Press the OK button. · The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function. 1. Specify the measures you wish to copy from the source track. · On the FROM side, specify the settings with the corresponding buttons. MEASURE DELETE Delete specified measures from a track. · The length of the performance accordingly decreases by the number of deleted measures. TRACK: Specify the track number you wish to copy the measures from. · This function does not work for the CHORD or RHYTHM track in which the repeat function has been stored. · If ALL is selected, the measures are inserted in all tracks at the same time. FIRST MEASURE: Specify the first measure to copy. LAST MEASURE: Specify the last measure to copy. 1. Use the TRACK and buttons to select the track from which measures are to be deleted. · This function does not work for the CHORD or RHYTHM track in which the repeat function has been stored. · If ALL is selected, the specified measures are deleted from all the tracks at one time. 2. Specify where you wish to insert the selected measures. · On the TO side, specify the settings with the corresponding buttons. specify the first measure to delete. · Measures from the CHORD, RHYTHM or CONTROL track can only be inserted in the same track. 3. Use the LAST MEAS and buttons to specify the last measure to delete. START MEASURE: Specify the start point to insert the selected measures. REPEAT: Specify the number of times the selected measures are to be repeated. 4. [. . . ] EXCLUSIVE data This is data that is specific to this instrument, and data for the GENERAL MIDI LEVEL 2 mode setting. Outline of MIDI functions AUTO PLAY CHORD MAIN VOLUME MAX SPLIT POINT MODE OFF/ON ONE TOUCH PLAY APC/SEQUENCER VOLUME IN MAX FADE SOUND OUT ARRANGER METRONOME POP ROCK RHYTHM GROUP FUNK & SOUL DISCO POP BALLAD BALLAD BALLROOM & SHOW TEMPO / PROGRAM STRINGS VOCAL SOUND GROUP SAX & ORGAN & GUITAR & SOUND HARPSI BRASS WOODWIND ACCORDION SYNTH EXPLORER SEQUENCER PLAY EASY REC FAVORITES PROGRAM MENUS DISK DISK IN USE CHORD FINDER SET 8 BEAT 16 BEAT USA WALTZ JAZZ & LATIN & & TRAD SWING WORLD MEMORY CONTRAST MALLET & PIANO ORCH DIGITAL BASS ORCH PERC WORLD MIXTURES MIXTURES DRAWBARS DRUM KITS MEMORY PROGRESSIVE PIANIST CONDUCTOR LEFT RIGHT 2 CHORD STEP REC LOAD PIANO STYLIST RIGHT 1 DIGITAL EFFECT MULTI EFFECT CHORUS REVERB MIN 1 2 VARIATION 3 4 OFF LOAD 1 FILL IN 2 1 2 SYNCHRO & BREAK 1 2 3 4 BEAT TAP TEMPO A B C SET 1/5 2/6 3/7 4/8 P. MEM 5-8 DEMO MUSIC STYLE ARRANGER INTRO & ENDING START / STOP - TRANSPOSE + HELP OTHER PARTS/TR MUTE PAGE DISPLAY HOLD EXIT GRAND UPRIGHT ELECTRIC MODERN SIMPLE PIANO TECHNI-CHORD BANK SEQUENCER COUNT RESET INTRO PIANO PANEL MEMORY 1. Press the PROGRAM MENUS button to turn it on. · The display looks similar to the following. 3. Follow the procedure to adjust the settings. · While you are adjusting the settings, when the TEMPO/PROGRAM indicator is lit, it indicates that the TEMPO/PROGRAM is available for setting the current function. 5. When you have finished setting the functions, press the PROGRAM MENUS button to turn it off. 2. [. . . ]