User manual PANASONIC TC21S1

[. . . ] Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital programming, but should continue to work as before for other purposes (e. g. , for watching low-power TV stations still broadcasting in analog, watching pre-recorded movies, or playing video games). When a Converter is used with an older television receiver, a signal splitter might be necessary to continue to receive low-power analog broadcasts via an antenna. For more information, please see www. DTV. gov. For information on the TV Converter program, and on government coupons that may be used toward the purchase of one, see www. dtv2009. gov, or call the NTIA at 1-888-DTV-2009. [. . . ] Set the input mode to HDMI1, HDMI2 or HDMI3* (p. 22), and make sure that the image is displayed correctly. * HDMI 3 (TC-32LX14 only) VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed. Please refer to the individual manuals for other manufacturers' equipment supporting the VIERA Link function. HDMI cable This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic's HDMI cable. Recommended part number: RP-CDHF15 (4. 9 ft/1. 5 m), RP-CDHG15 (4. 9 ft/1. 5 m), RP-CDHF30 (9. 8 ft/3. 0 m), RP-CDHG30 (9. 8 ft/3. 0 m), RP-CDHG50 (16. 4 ft/5. 0 m) * For more details on the external equipment's connections, please refer to the operating manuals for the equipment. 30 VIERA LinkTM Connections Follow the connection diagrams below for HDAVI control of a single piece of AV equipment such as a DVD recorder (DIGA), RAM theater, or Player theater system. Refer to page 32-35 for Setup Menu settings and additional control information. Optional HDMI and/or optical cables are not included. If connection (or setting) of equipment compatible with HDAVI control is changed, switch the power of this unit Off and On again while the power of all equipment is On (so that the unit can correctly recognize the connected equipment) and check that the DVD recorder (DIGA), RAM theater, and Player theater playback operate. · Note HDMI 1 is recommended. The connected VIERA Link compatible equipment will be turned off automatically when not in use. To set the Home Theater system as default speakers, change the default speakers setting from "TV" to "Theater". Sound will be output from the Home Theater whenever the TV is powered on. If the "ONE TOUCH PLAY" key is pressed on the remote control for Panasonic Home Theater system, the following sequence of operations is performed automatically. Home Theater power switches On, and playback begins. TV power switches On, and the playback screen is displayed. Audio is muted on the TV and switches to the theater system. The following information about the TV settings can be transmitted to each piece of equipment (Recorder/Home theater/Player) that has "HDAVI Control 3 or later" function connected to a TV with HDMI cable. Transmittable data On Screen Display Language setting (English/Español/Français) Panel Aspect Ratio (16:9 fixed) Closed caption information (Mode/CC type/Digital setting) Channel information (Input signal/Channel list/Caption information) Note There is a possibility that all the GUI language information might be set from equipment that has HDMI CEC function connected to TV with HDMI cable. Depending on operating conditions or the specification for each piece of equipment the setting may or may not be applied. For more details on the external equipment's operation, please refer to the operating manuals for the equipment. [. . . ] warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase. Plasma TV / Monitor LCD TV (42 in & over) In-home service In-home service One (1) year, parts (including Plasma Panel) and labour. One (1) year, parts (including LCD Panel) and labour. In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic service facility. LIMITATIONS AND EXCLUSIONS This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. [. . . ]