User manual PANASONIC TC-22LT1

[. . . ] POWER TV/VIDEO DISPLAY CH RETUNE VOL MUTE 22 Diagonal LCD TV ENTER ASPECT MENU RETURN SLEEP Operating Instructions Model No. TC-22LT1 For assistance, please call : 1-800-211-PANA (7262) or send e-mail to : consumerproducts@panasonic. com or visit us at www. panasonic. com (U. S. A) (Puerto Rico) For assistance, please call : 787-750-4300 or visit us at www. panasonic. com For assistance, please call : 1-800-561-5505 or visit us at www. panasonic. ca (Canada) Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. English TQBC0374 Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. s Note to CATV System Installer: This reminder is provided to direct the CATV system installer's attention to Article 820­40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. s Important Safety Instructions for LCD TV Read these instructions and apply them with your LCD TV. For example: Avoid placing it near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Unplug this LCD TV from the wall outlet before cleaning. [. . . ] (See page 24) R-TUNE VOL MUTE ASPECT button Change of screen size (See page 19) NORMAL JUST ZOOM FULL Moves cursor upward during menu mode. Moves cursor to the left during menu mode. ENTER Moves cursor to the right during menu mode. MENU ENTER ASPECT RETURN SLEEP SLEEP button The Wide LCD TV may be preset to switch to stand-by after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed. 30 60 90 0 When 3 minutes remain, "Off timer 3" will flash. The off timer is cancelled if a power interruption occurs. Before the timer automatically turns the power off, the remaining time will blink on the screen ("3" for 3 minutes, "2" for 2 minutes and "1" for 1 minute before the power goes off). Moves cursor downward during menu mode. MENU button Press to display the Menu screen. MENU ADJUST SET UP PICTURE PICTURE ADJUST POSITION / SIZE AUDIO AUDIO ADJUST RETURN button 12 Power ON / OFF Connecting the Plug to the Wall Outlet 32 1 2 DC IN 15 V R-AUDIO-L VIDEO VIDEO 1 IN S-VIDEO Note: The TV and AC adaptor will still consume some power as long as the power cord is still inserted into the wall outlet. How to Turn the Power On Push the POWER switch on the TV to turn the set on. POWER-ON: Green Turn the power of the TV set off by pressing the POWER switch on the TV when the TV is on or in standby mode. Example: The screen below is displayed for a while after the TV is turned on. (setting condition is an example. ) NORMAL CH 6 STEREO SAP MONO POWER TV/VIDEO DISPLAY Remote control signal sensor Power Indicator CH POWER Press the POWER button on the remote control to turn the TV off: Red (standby) Press the POWER button on the remote control to turn the TV on: Green R-TUNE VOL MUTE 13 Flow Chart of MENU All adjustments and setting functions equipped in this set can be made using the menu buttons. The menu screen is composed of 2 menus, the ADJUST menu and the SET UP menu. 1 If the MENU button is pressed, the MENU screen will be displayed. If the MENU button is pressed once more, the MENU screen will be cleared. MENU POWER TV/VIDEO DISPLAY 2 Select desired MENU by pushing Right " " button or Left " " button. CH ENTER R-TUNE VOL MUTE ENTER MENU ADJUST ASPECT SET UP MENU RETURN SLEEP PICTURE PICTURE ADJUST POSITION / SIZE AUDIO AUDIO ADJUST MENU ADJUST SET UP PICTURE PICTURE ADJUST POSITION / SIZE AUDIO AUDIO ADJUST ENTER MENU ADJUST SET UP PROGRAM CH LOCK CLOSED CAPTION INPUT LABEL OTHER ADJUST 14 Flow Chart of MENU 1 Press to select each item. 2 Press to adjust the screen that is displayed. ENTER TO PICTURE ADJUST menu PICTURE ADJUST NORMAL PIC MODE BACK LIGHT PICTURE BRIGHTNESS COLOR TINT SHARPNESS AI PICTURE STANDARD +5 0 0 0 0 0 COOL ON OFF TO POSITION/SIZE POSITION / SIZE NORMAL NORMALIZE SIZE 1 RETURN TO AUDIO ADJUST menu AUDIO ADJUST NORMAL MODE BASS TREBLE BALANCE SURROUND STEREO SAP MONO AUTO 0 0 0 ON (See page 22) (See page 23) (See page 20) TO INPUT LABEL selection screen INPUT LABEL VIDEO1 VIDEO2 COMPONENT1 COMPONENT2 VIDEO1 VIDEO2 COMPONENT1 COMPONENT2 TO LOCK selection screen LOCK MOTION PICT. OFF TV PARENTAL OFF ENTER CODE FIRST ON CHANGE SETTING ON CHANGE SETTING TO CLOSED CAPTION selection screen CLOSED CAPTION MODE C1 TO PROGRAM CHANNELS adjust screen PROGRAM CHANNELS MODE TV AUTO PROGRAM MANUAL PROGRAM CABLE (See page 29) (See page 16, 17) (See page 25) TO OTHER ADJUST screen OTHER ADJUST NATURL CLR VIDEO NR 3D Y/C ID-1 IMAGE ADJ. OFF OFF OFF OFF 1 ON ON ON ON 2 (See page 26) (See page 30 - 32) 15 Tuning channels (Automatic channel programming) Automatically scans all TV channels and stores them in memory. 1 2 Turn the Power on and press the TV/VIDEO button to display the TV channel. Press the MENU button to display the MENU screen and select SET UP. Press to select PROGRAM CH. ENTER MENU ADJUST SET UP Press to display the PROGRAM CHANNELS screen. PROGRAM CH LOCK CLOSED CAPTION INPUT LABEL OTHER ADJUST 3 ENTER Press to select MODE. Press to select TV or CABLE. PROGRAM CHANNELS MODE TV AUTO PROGRAM MANUAL PROGRAM CABLE 4 ENTER Press to select AUTO PROGRAM. Press to display the confirmation screen. AUTO PROGRAM Activate "AUTO PROGRAM?" YES NO 5 ENTER Press to select YES. If YES selection Press to run AUTO PROGRAM AUTO PROGRAM In "AUTO PROGRAM" CHANNEL 59 MENU STOP Channels will automatically advance until all channels have been scanned. Channel numbers with a video signal present will turn light blue indicating it has been stored in the Channel Scan Memory. 6 7 · · · 16 Press the RETURN button to return to the PROGRAM CHANNELS screen. Press the MENU button to exit the set up menu. Notes: When buttons are pressed with AUTO PROGRAM running, the TV set will return to normal viewing. (Channels searched up to this point are added. ) After AUTO PROGRAM is finished, the lowest channel number added will be received. When there are no receivable channels, channel 69 is displayed for TV and channel 125 is displayed for cable TV. Tuning channels (Manual channel programming) Use this setting when changing setting of receiving channels or changing the channel display. Turn the TV on and select the broadcast channel. Follow the steps on the previous page to display the PROGRAM CHANNEL screen. Selecting the PROGRAM CHANNELS menu 1 2 Refer to previous page Tuning channels step 1 to 3. Press to select MANUAL PROGRAM. [. . . ] 22 ­ ­ 10, 11 19, 22 · Has the screen position adjustment been left shifted?· This is due to noise generated when changing channels. They appear bent · This ismay a malfunction. due to the received channel or some DVD software. not inserted into each · Are plugs securelyplugs all the way. [. . . ]