User manual PANASONIC TC-43P250H

[. . . ] Projection Television Operating Instructions Model No. TC-43P250H TX-43P250H TX-43P250X TC-51P250H TX-51P250H TX-51P250X This is a combined Operating Instruction manual for all the above series of models. Please read these instructions before operating your set and retain them for future reference. TQBC0279-1 Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Projection television set. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. [. . . ] STROBE CH COLOUR SET VCR / GAME TEXT SELECT FASTEXT OFF DYNAMIC SETUP MENU CHILD LOCK OFF PICTURE SHIFT OFF ACCESS TUNING MENU CONVERGENCE LANGUAGE ENGLISH Press to display the SETUP MENU. OFF ENGLISH Press to display the TUNING MENU. 2 1 Select the "POSITION" or the "DIRECT" CH SELECT Press to select the "CH SELECT (Channel Select) " Mode. Press to select the "POSITION" or the "DIRECT". Setting range when the "POS. " (Position) has been selected: Position 0-99 Setting range when the "DIRECT" has been selected: Channel 0-125 The channel select indicator will change as follows. DIRECT TUNING MENU CH SELECT SYS SELECT AUTO TUNE MANUAL TUNE SOUND SYS COLOUR SYS FINE TUNE SKIP POSITION E. EUROPE 6. 0MHz AUTO OFF POSITOIN 2 Regional System Selection SYS SELECT (Before AUTO tuning and MANUAL tuning, set the "SYS SELECT" mode, as detailed below. ) Press to select the "SYS SELECT". The system select indicator will change as follows. CHINA JAPAN HK/UK CATV M. EAST AMERICA NZ/INDONES SPECL VER AUSTRALIA E. EUROPE TUNING MENU CH SELECT SYS SELECT AUTO TUNE MANUAL TUNE SOUND SYS COLOUR SYS FINE TUNE SKIP POSITION E. EUROPE 6. 0MHz AUTO OFF System Select by Regional SYSTEM SELECT CHINA HK / UK ASIA/M. EAST NZ / INDONES AUSTRALIA E. EUROPE SPECL VER AMERICA CATV JAPAN Region China Hong Kong, United Kingdom Malaysia, Singapore, Thailand, Asia countries, Kuwait, Saudi Arabia, United Arab Emirates, Middle East countries, etc. South Africa U. S. A. , Chile, Mexico, Panama, Pelu, Philippines, Taiwan, Venezuela, etc. USA CATV Japan 21 Tuning Channels Sound System Selection (Different region use differing systems) This function is used only in the TV mode when the sound is not clear or no sound is produced on a Programme Number, and is not applicable in AV mode . 1 Press to select the "SOUND SYS". TUNING MENU CH SELECT SYS SELECT AUTO TUNE MANUAL TUNE SOUND SYS COLOUR SYS FINE TUNE SKIP POSITION JAPAN 6. 0MHz AUTO OFF Sound System Condition. 2 Press until the optimum sound is obtained. The sound system will change as shown. 4. 5MHz 6. 5MHz 5. 5MHz 6. 0MHz TUNING MENU CH SELECT SYS SELECT AUTO TUNE MANUAL TUNE SOUND SYS COLOUR SYS FINE TUNE SKIP POSITION JAPAN 6. 0MHz AUTO OFF Note: These are different sound broadcast transmission systems applicable to differing countries. 3 TV/AV Press to exit from the "SOUND SYS". This returns the set to the normal viewing condition. The selected Sound System is automatically memorised. 22 Tuning Channels Colour System Selection (Different region use differing systems) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received. 1 Press to select the "COLOUR SYS". TUNING MENU CH SELECT SYS SELECT AUTO TUNE MANUAL TUNE SOUND SYS COLOUR SYS FINE TUNE SKIP POSITION JAPAN 6. 0MHz AUTO OFF Colour System Condition. 2 Press to produce the optimum image. The colour system will change as shown. AUTO NTSC3. 58 PAL SECAM NTSC4. 43 TUNING MENU CH SELECT SYS SELECT AUTO TUNE MANUAL TUNE SOUND SYS COLOUR SYS FINE TUNE SKIP POSITION JAPAN 6. 0MHz AUTO OFF Note: PAL, SECAM and NTSC 3. 58 are different colour signal broadcast transmission systems applicable to differing countries. NTSC 4. 43 is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL television equipment. 3 TV/AV Press to exit from the "COLOUR SYS". This returns the set to the normal viewing condition. The selected Colour System is automatically memorised. 23 Tuning Channels Channel Selection Select the most easily viewed channel selection method. 2ch 4ch 6ch 8ch 10ch 12ch 14ch 16ch 18ch 20ch POSITION SELECT When the Channel Selection is on POS. (Position), and Auto Tune is performed, the unit memories the channels tuned in order from programme No. 1. Press the button Press the button Press the button Example Programme Number 1 2 3 4 5 6 7 8 9 10 Channel Display 2 4 6 8 10 12 14 16 18 20 Received Channel 2 4 6 8 10 12 14 16 18 20 1 2 3 to view channel 2. [. . . ] Press the Blue button, select the page number, then press and hold The page number is now stored. Press to recall the stored page number. 39 TELE TEXT Teletext page Press to display special functions to view the TV picture whilst searching for a Teletext page . News Flash Press to view the TV picture When a news flash page has been selected. Update Press to see the update of information on certain pages. SET UP + Yellow P100 P100 When found a page. Press to view the page. Yellow TV/AV TV picture viewing Press to display the News Flash. When an update is received. [. . . ]