User manual PANASONIC TH-42LF25ER

[. . . ] Model No. TH-42LF25ER TH-47LF25ER Operating Instructions FULL HD LCD Display h English Please read these instructions before operating your set and retain them for future reference. Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. [. . . ] Adjustable menu changes depending on signal, input and menu setting. Pos. /Size Normalise Auto Setup Normal Setup Signal Screensaver Input label Wobbling Component/RGB-in select Power management No signal power off No activity power off 1/2 Signal 3D Y/C Filter Colour system Cinema reality Noise reduction On Auto Off Off [ AV ] H-Pos H-Size V-Pos V-Size Clock Phase Dot Clock 1:1 Pixel Mode 0 0 0 0 0 0 Off Off RGB Off Disable Enable On Off English(UK) Page 37-40 Screensaver PRESENT TIME Start Mode Off MON 0 : 02 Page 22, 23 Standby save ECO OSD Language Page 29, 30 Input label VIDEO Component PC DVI HDMI1 HDMI2 VIDEO Component PC DVI HDMI1 HDMI2 Setup Picture Normalise Normal 2/2 Picture Mode Backlight Contrast Brightness Colour Tint Sharpness White balance Advanced settings Normal 100 70 50 50 50 50 Normal MULTI DISPLAY Setup Set up TIMER PRESENT TIME Setup Menu Display Duration Menu Transparency 20 15 S Page 27-40 Page 32 Page 24, 25 MULTI DISPLAY Setup MULTI DISPLAY Setup Horizontal Scale Vertical Scale Bezel H Adjustment Bezel V Adjustment Location Off 1 1 10 10 A1 Advanced settings Normalise Normal Page 34, 35 0 2. 2 Off 50 50 50 50 50 50 Input level Gamma AGC W/B High R W/B High G W/B High B W/B Low R W/B Low G W/B Low B Set up TIMER PRESENT TIME MON 0 : 03 1 Program Off Timer Function MON Day Power Mode Power On Time 0 : 00 Input VIDEO Page 28 Page 24, 25 PRESENT TIME Setup PRESENT TIME MON 99 : 99 Set MON DAY 99 : 99 PRESENT TIME Page 27 Sound Normalise Normal Sound Mode Bass Treble Balance Surround Normal 0 0 0 Off Page 26 21 Adjusting Pos. /Size 1 2 3 4 Press to display the Pos. Press to select the menu to adjust. Pos. /Size Normalise Auto Setup Normal Press to adjust the menu. H-Pos H-Size V-Pos V-Size Clock Phase Dot Clock 1:1 Pixel Mode 0 0 0 0 0 0 Off Press to exit from adjust mode. Notes: Unadjustable items are grayed out. Adjustable items differ depending on the input signal and the display mode. Note: If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the Picture Pos. /Size function. Auto Setup H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the RGB or PC signal is received. This setting only operates when a PC signal or RGB signal is input, and the aspect is "16:9". Using Remote Control When on the remote control is pressed, "Auto Setup" will be executed. When Auto Setup does not work, "Invalid" is displayed. Notes: · When digital RGB signal input, Dot Clock and Clock Phase cannot be made. · Auto Setup may not work when a cropped or dark image is input. In such case, switch to a bright image with borders and other objects are clearly shown, and then try auto setup again. · Depending on the signal, out of alignment may occur after Auto Setup. Carry out fine tuning for the position/size as required. · If Auto Setup cannot set properly for vertical frequency 60Hz XGA signal (1024×768@60Hz and 1366×768@60Hz), pre-selecting the individual signal in "XGA Mode" (see page 38) may results in correct Auto Setup. · Auto Setup does not work well when a signal such as additional information is superimposed out of valid image period or intervals between synchronizing and image signals are short. · If Auto Setup cannot adjust correctly, select "Normalise" once and press ACTION ( ), then adjust Pos. · If the picture goes off screen in the horizontal direction as a result of performing Auto Setup, perform Dot Clock adjustment. 22 Adjusting POS. /SIZE H-Pos Adjust the horizontal position. V-Pos Adjust the vertical position. H-Size Adjust the horizontal size. V-Size Adjust the vertical size. Clock Phase Dot Clock (During Component, RGB and PC input signal) Eliminate the flickering and distortion. (During Component, RGB and PC input signal) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. [. . . ] The liquid crystal panel is built with very high precision technology giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as fixed points of red, blue, green, or black. Please note this does not affect the performance of your LCD. If you display a still picture for an extended period, the image might remain on the screen. [. . . ]