User manual PANASONIC TH-42LF5E

[. . . ] Visit our Panasonic Web Site http://panasonic. net Table of Contents Important Safety Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Accessories Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] /Size 1 2 3 4 Press to display the Pos. Press to select the menu to adjust. Pos. /Size Normalise Auto Setup Normal Press to adjust the menu. H-Pos H-Size V-Pos V-Size Clock Phase Dot Clock 1:1 Pixel Mode 0 0 0 0 0 0 Off Press to exit from adjust mode. Notes: Unadjustable items are grayed out. Adjustable items differ depending on the input signal and the display mode. Note: If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the Picture Pos. /Size function. Auto Setup H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the RGB or PC signal is received. This setting only operates when a PC signal or RGB signal is input, and the aspect is "16:9". Using Remote Control When on the remote control is pressed, "Auto Setup" will be executed. When Auto Setup does not work, "Invalid" is displayed. Notes: · Auto Setup may not work when a cropped or dark image is input. In such case, switch to a bright image with borders and other objects are clearly shown, and then try auto setup again. · Depending on the signal, out of alignment may occur after Auto Setup. This menu selects higher than normal levels of Brightness and Contrast. Press to enter Advanced settings . Advanced settings Enables fine picture adjustment at a professional level (see next page). Advanced settings Normalise Normal Cinema Ideal for movies. Note: If you would like to change the picture and colour of the selected Picture menu to something else, adjust using the items in the Picture menu. (see next page) Input level Gamma AGC W/B High R W/B High G W/B High B W/B Low R W/B Low G W/B Low B 0 2. 2 Off 50 50 50 50 50 50 Press " " or " " button to switch between modes. Normal Warm Cool Helpful Hint ( / Normalise Normalisation) While the "Picture" menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings. 24 Picture Adjustments Item Backlight Contrast Brightness Colour Tint Sharpness Effect Darker Brighter Adjustments Adjusts luminance of the back light. Selects the proper brightness and density for the room. Adjusts for easier viewing of dark pictures such as night scenes and black hair. Adjusts picture sharpness. Less More Darker Brighter Less More Reddish Greenish Notes: · "Colour" setting can be adjusted for Video input signal. · You can change the level of each function (Backlight, Contrast, Brightness, Colour, Tint, Sharpness) for each Picture Mode. · The setting details for normal, dynamic and cinema respectively are memorized separately for each input terminal. · The "Tint" setting can be adjusted for NTSC signal only during Video input signal. [. . . ] The unit digitally processes the various signals in order to reproduce esthetically pleasing images. As such, it sometimes takes a few moments for the picture to appear when the power has been turned on, when the input has been switched. Due to the characteristics of the system used to drive the panel, the edges may appear to flicker in the fast-moving parts of the images: This is normal and not indicative of malfunctioning. This is a characteristic of liquid crystal panels and is not a problem. [. . . ]