User manual PANASONIC TH-42PA45E

[. . . ] Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. [. . . ] 18) Fine tuning of channels (during rain, etc. ) Selects optional colour system depending on video signals (Auto / PAL / SECAM / M. NTSC) Adjusts volume of individual stations Set "On" when the decoder is connected to AV2 or AV3 terminal via a Q-Link equipment (Off / On) Changes language for on-screen displays Selects optional colour system based on video signals in AV mode Adjusts volume for AV and HDMI mode Number and positions of alternatives Advanced Text language West Setup menu To return to TV EXIT Sharpness Changed Side panel Power save Programme edit Off Off Access Access Access Adjust using the slide bar Moved To return to the MENU Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) OSD language Colour system Volume correction Tuning menu previous screen Go to the next screen Tuning menu Access Auto Displays the next screen Off Access Auto To reset the setting N · In AV mode, the Sound menu and Setup menu give a smaller number of options. 14 15 Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions. 1 OK MENU EXIT Display the menu MENU Select the programme number to edit Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Name Programme number 3 FTP select Cursor 2 3 4 5 Select "Setup menu" M a i n me n u Picture menu S o u n d me n u S e t u p me n u next select Edit To delete To add To move Edit channels Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 red green yellow After confirming, press After confirming, press red green yellow Select destination Select "Tuning menu" Setup menu Q-Link AV2 out Control with HDMI Teletext Off timer Text language Side panel Power save Tuning menu OSD language AV2 TV On TOP Off West Off Off Access To change channel number Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 · Select the "Chan. " field Change number (Can also be changed with "C" and number buttons) Editing and Setting Channels next select Select the function Tuning menu Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) Access Delete Add Move Change Programme edit To change the name of the broadcaster displayed when selecting channels Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Select the "Name" field Select the character To next character Repeat next select TV Auto Off Set channel number Change name Lock Change sound system Download to equipment ABCDEFGHIJKLMNOPQRST UVWXYZ+-. 0123456789 Usable characters To lock Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Select the "Lock" field · Select "On" ("Off" to unlock) You cannot select the channel with number buttons or the "C" button when locked. Advanced To exit EXIT To change sound system based on signals Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Select the "Sys" field Select sound system SC1 : PAL B, G, H / SECAM B, G SC2 : PAL I SC3 : PAL D, K / SECAM D, K F: SECAM L / L' To download channel information to a Q-Link compatible equipment connected to the unit · · OK blue Automatically transmitted (for a few sec. ) For details (p. 20) Not available if "Q-Link" is "Off" in the Setup menu. 14) Store 16 17 Editing and Setting Channels Automatically set the channels received in the area For Manual tuning, using the buttons on the unit ("Tuning mode" on p. 7) Start Auto setup set WARNING All current tuning data will be erased Start Auto Setup Exit Return OK (Press repeatedly until "Tuning mode" appears) or (Access "Manual tuning") Set automatically Auto setup Select your country Country Deutschland Österreich France Italia España Portugal Nederland Danmark Sverige Norge Suomi Belgium Schweiz ELLADA Polska Ceská republika Magyarország E. Eu (Programme, Channel (select), Sound system) select OK start or (Change programme or start searching channels) Settings are made automatically CH12 AUTO SETUP IN PROGRESS SEARCHING : PLEASE WAIT 02 78:01 41 · · · · Note The settings are downloaded to a Q-Link compatible equipment connected to the unit. When the sequence is completed, the broadcast of programme number "1" will appear. No data is stored if an Auto setup sequence is interrupted. · (Store) - Editing and Setting Channels (Repeat) Programme number (flash) Exit Return To return to TV CH12 SC1 1 Channel number (flash) Sound system (flash) Manual tuning -, + TV / AV STR F 02 STR : : : : F Search Move cursor To store To exit 78:01 -/ +/ 41 TV / AV Channel To freely change settings after Auto setup Select the programme number and search through the channel Programme number CH12 Channel search Advanced 1 Manual tuning Set manually Manual tuning 02 78:01 Search down/up Store Exit Return 9 Direct entry 41 C 0 Store OK · The programme number blinks. Repeat and · Note If a VCR is connected with only the RF cable, select programme number "0". 18 19 External Equipment Q-Link Q-Link interlocks the TV unit and VCR / DVD recorder, enables easy recording and playback. Control with HDMI " Control" Condition · · · · · Use the VCR / DVD recorder with the following logos: "Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic", or "SMARTLINK" Connect the equipment to this unit's AV2 or AV3 terminal via a "fully-wired" SCART cable. 22) Q-Link terminal setup in Setup menu (Q-Link, AV2/AV3 out). 18) When first using this unit, see "Auto Setup". 16) Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function. HDMI connections to some Panasonic equipments (Panasonic DVD Recorder DIGA, Panasonic Player theatre, Panasonic Amplifier, etc. ) allow you to enjoy the easy playback or home theatre. About connections, see "Connections" (p. Non-HDMI-compliant cables cannot be utilized. About applicable equipments, consult your local Panasonic dealer. Download channel settings After connections turn the equipments on and then, switch the TV unit on. Display the menu Features available Some recording equipments are not applicable. [. . . ] 24) Turn Off the TV unit and equipment, then turn them On again. Check an input signal from the equipment. 28) Use an equipment compliant with EIA/CEA-861/861B. A pixel or luminescent spot may occasionally be missing in plasma displays. (Not a faulty symptom) FAQs, etc. The remote control does not work TV · · Are the batteries installed correctly? [. . . ]