User manual PANASONIC TH-42PG9E

[. . . ] Operating Instructions Progressive Wide Hospitality Plasma Display Model No. TH-37PG9E TH-42PG9E The illustration shown is an image. Please read these instructions before operating your set and retain them for future reference. English Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. [. . . ] Notes: · The sub picture sound is heard while a sub picture operation is underway. · The sub picture operation automatically returns to the main picture operation if a sub picture operation has not been performed for about 5 seconds or if any of the remote control buttons is pressed (except button). Press to change input signal. [Example] Main picture label is bright PC1 VIDEO2 Sub picture label is bright PC1 VIDEO2 SELECT A B A B Input modes switching is possible Main picture label is changed VIDEO2 VIDEO1 Sub picture label is changed PC1 VIDEO2 C B A D Picture is changed Press to move the sub picture. Each time the location of the sub picture will be moved. Notes: · This button is effective only in the picture in picture. · The sub picture may be hidden by the on screen display, depending on its position. Notes: · Sound output is from the picture which is selected in Audio Out (PIP) (See page 23). · In 2 screen display, the same input mode cannot be selected for the main picture and sub picture. · The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the 2-picture display mode. · Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail. · Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily. · Following combinations of two analog signals cannot be displayed simultaneously; Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB) 19 Advanced PIP 1 2 Press to display the Setup menu. Press to select "OSD Language". 3 4 Press and hold until the Options menu is displayed. Press to select Advanced PIP. Options Off-timer function Onscreen display Initial INPUT Initial VOL level Maximum VOL level INPUT lock Studio W/B Advanced PIP Display size 1/3 Enable On Off Off 0 Off 0 Off Off Off Off 5 Press to adjust the menu. Off : Sets normal two screen display mode (see page 19). One screen Advanced PIP 6 7 Note: To use , , Press to exit from Options menu. Sub screen Main screen (When Advanced PIP is On) Press repeatedly. Each time pressing this button main picture and sub picture will be displayed as above. , buttons for the screen operations, follow the procedures in the previous page. Notes: · Advanced PIP corresponding signal Sub screen NTSC, PAL, SECAM (tuner, video) 525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1250/50i (Component Video, RGB, DVI, SDI, HDMI) Main screen 640x480@60Hz, 852x480@60Hz, 1024x768@60Hz, 1366x768@60Hz (RGB, DVI, HDMI) 1280x768@60Hz (DVI) · Sound output is from the picture which is selected in Audio Out (PIP) (See page 23). · In 2 screen display, the same input mode cannot be selected for the main picture and sub picture. · The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the 2-picture display mode. [. . . ] The unit digitally processes the various signals in order to reproduce esthetically pleasing images. As such, it sometimes takes a few moments for the picture to appear when the power has been turned on, when the input has been switched or when the images for the main picture and sub picture on the two screens are swapped. Due to the characteristics of the system used to drive the panel, the edges may appear to flicker in the fast-moving parts of the images: This is normal and not indicative of malfunctioning. When viewing the side panels at the "High" or "Mid" setting, the brightness on both sides may change depending on the kind of program shown: This is normal and not indicative of malfunctioning. [. . . ]