User manual PANASONIC TH-42PR10U

[. . . ] Operating Instructions Manual de instrucciones High Definition Hospitality Plasma Display Pantalla de plasma de alta definición para la industria hotelera Model No. Número de modelo. TH-37PR10U TH-42PR10U The illustration shown is an image. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. La ilustración mostrada es una imagen. Antes de conectar, utilizar o ajustar este producto, lea completamente este manual de instrucciones; y guárdelo para consultarlo en el futuro en caso de ser necesario. English Español TQB2AA0801 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. Refer servicing to qualified service personnel. [. . . ] · The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the 2-picture display mode. · Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail. · Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily. · Following combinations of two analog signals cannot be displayed simultaneously. Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB) 20 Advanced PIP 1 2 Press to display the Setup menu. Press to select "OSD Language". 3 4 Press and hold until the Options menu is displayed. Press to select Advanced PIP. Options 1/3 Weekly Command Timer 5 Press to adjust the menu. Off : Sets normal two screen display mode (see page 20). One screen Advanced PIP Onscreen display Initial INPUT Initial VOL level Maximum VOL level INPUT lock Button lock Remocon User level Advanced PIP On Off Off Off Off Off Off Off 0 0 6 (When Advanced PIP is On) Press to exit from Options menu. 1 2 3 Sub screen Main screen Press repeatedly. 6 Each time pressing this button main picture and sub picture will be displayed as above. 7 Note: To use 5 4 , , , buttons for the screen operations, follow the procedures in the previous page. Notes: · Advanced PIP corresponding signal Sub screen Main screen NTSC, PAL, SECAM (tuner, video) 640x480@60Hz, 852x480@60Hz, 1024x768@60Hz, 525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1366x768@60Hz (RGB, DVI, HDMI) 1250/50i (Component Video, RGB, DVI, SDI, HDMI) 1280x768@60Hz (DVI) If "Input lock" in Options menu is set to other than "Off", MULTI PIP function isn't available. Sound output is from the picture which is selected in Audio OUT (PIP) (See page 24). In 2 screen display, the same input mode cannot be selected for the main picture and sub picture. The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the 2-picture display mode. Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail. Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily. Following combinations of two analog signals cannot be displayed simultaneously. Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB) Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals. · · · · · · · · 21 PICTURE Adjustments 1 2 Press to display the PICTURE menu. Press to select the menu to adjust. Select the desired level by looking at the picture behind the menu. Note: Menu that cannot be adjusted is grayout. [. . . ] Serial numbers that have been altered, defaced or removed void this warranty. This warranty does not cover replacements or repairs necessitated by loss or damage resulting from any cause beyond the control of PCI. Marking or retained images (sometimes called "burn-in") resulting from the display of fixed images on video display products are not defects and are not covered under this warranty. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. [. . . ]