User manual PANASONIC TH-42PV600R

[. . . ] 4 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Fitting remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Quick start Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The best tuning position is automatically memorized. Once this operation is completed the TV will display programme position 1. AUTO SETUP IN PROGRESS SEARCHING:PLEASE WAIT 02 99:21 41 4 TV/AV Press to exit from the Tuning Menu. This returns the set to the normal viewing condition. SETUP : Return to tuning menu TV/AV : To exit Note: If an auto setup process is aborted midway, all channels that have been set up to that point will be saved to memory. 18 Tuning menu SET UP 1 2 Press to display the Setup menu. Setup menu Q-Link AV2 out Teletext Off timer Text language Side panel Power save Tuning menu OSD language Off TV TOP Off West Off Off Access Press to select the Tuning menu. Press to Access the Tuning menu. 1 4 7 C 2 5 8 0 3 6 9 3 Press to select the menu to adjust. Press to adjust or Access. Tuning menu Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) Access TV/AV 4 Press at any time to go back to watching TV. Auto Off Tuning menu Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) Access Access Access Auto Off Access in order to customise your programme settings (see page 36-39). (eg: adding or deleting a programme position. ) Allows you to automatically retune this set. Useful if you move house and wish to retune your set to the local stations (see page 18). Allows individual programme positions to be tuned manually (see page 20). Use to make small adjustments to the tuning of an individual station (useful for example when weather conditions are affecting reception quality of a program). Lets you select the correct transmission standard for the transmission signal being received. This returns the set to the normal viewing condition. 21 Tuning menu Colour System Selection (Different region use differing systems) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received. 1 Press to select the Colour System. Tuning menu Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) 1 4 7 C 2 5 8 0 3 6 9 Auto Off 2 Press to produce the optimum image. N The Colour system will change as shown. (When in TV mode) (When in AV mode) PAL Auto SECAM M. NTSC PAL SECAM Auto M. NTSC NTSC Note: · PAL and SECAM are different colour signal broadcast transmission systems applicable to differing countries. · M. NTSC is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL television equipment. · During RGB input signal in AV1, AV4 mode, PAL and SECAM are not available. · During RGB input signal in AV1, AV2, and during component input signal in AV4C, this function is not available. 3 (When in TV mode) STR 3 (When in AV mode) TV/AV Press to store the selected Colour System. TV/AV Press to exit from the Colour System. This returns the set to the normal viewing condition. Press to exit from the Colour System. This returns the set to the normal viewing condition. The selected Colour System is automatically memorised. Volume correction Control the gain of the received signal, which can differ between stations. Lets you adjust the volume level of individual station. Use this feature if the volume level varies significantly between stations. [. . . ] If the computer being connected is not DDC1/2B-compatible, you will need to make setting changes to the computer at the time of connection. (4) Some PC models cannot be connected to the set. (5) There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal. (6) The computer shown in the illustration is for example purposes only. [. . . ]