User manual PANASONIC TH-47LFT30W

[. . . ] Model No. TH-47LFT30W TH-47LFX30W Operating Instructions DISPLAY Edition FULL HD LCD Display h English Please read these instructions before operating your set and retain them for future reference. Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. [. . . ] (see page 17) OFF TIMER button The Display can be preset to switch to stand-by after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed. 30 min 60 min 90 min 0 min When three minutes remain, "Off timer 3 min" will flash. The off timer is cancelled if a power interruption occurs. AUTO SETUP button Automatically adjusts the position/ size of the screen. (see page 23) SET UP button (see page 28) SOUND button (see page 27) Volume Adjustment Press the Volume Up "+" or Down "­" button to increase or decrease the sound volume level. R button (see page 22) Press the R button to return to previous menu screen. RECALL button Press the "RECALL" button to display the current system status. 1 Input label 2 Aspect mode (see page 20) 3 Off timer The off timer indicator is displayed only when the off timer has been set. 4 Clock display (see page 40) PC 4:3 1 2 4 10:00 Off timer 90min 3 Digital Zoom (see page 21) 19 ASPECT Controls The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Note: Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode select function to shrink or expand the picture, you may be violating the copyright under copyright law. It is prohibited to show or alter the copyrighted materials of other people for commercial purposes without the prior permission of the copyright holder. Press repeatedly to move through the aspect options: 4:3 Zoom1 Zoom2 16:9 [from the unit] Note: The aspect mode is memorized separately for each input terminal. Aspect mode Picture Enlarged screen The aspect mode changes each time the ENTER button is pressed. Description The display of the pictures fills the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally, and displayed. This mode is suited to displaying anamorphic pictures with a 16:9 aspect ratio. 16:9 Pictures with a 4:3 aspect ratio are displayed with their original aspect ratio. Side panels are displayed at the left and right edges of the screen. 4:3 The pictures with a 4:3 aspect ratio among the 16:9 aspect ratio signals are displayed with their original aspect ratio. The left and right edges of the pictures are masked with side panels. Letterbox pictures with a 16:9 aspect ratio are enlarged vertically and horizontally so that their display fills the screen. The top and bottom edges of the pictures are cut off. Letterbox pictures with a 16:9 aspect ratio are enlarged vertically and horizontally so that their display fills the screen. The top and bottom edges as well as the left and right edges of the pictures are cut off. Zoom1 Zoom2 20 Digital Zoom This displays an enlargement of the designated part of the displayed image. 1 Display the operation guide. Press to access Digital Zoom. The operation guide will be displayed. Exit 1 During Digital Zoom, only the following buttons can be operated. [. . . ] Press to select "OSD Language". Signal Screensaver Input label Wobbling Power management No signal power off No activity power off Off On Enable Press for more than 3 seconds. Standby save ECO OSD Language Enable On Off English(UK) 3 Press to select "Shipping". Options Shipping Press to display the Shipping menu. 4 Press to select "YES". Shipping YES NO Press to confirm. 5 6 Wait for 10 seconds. Press the power switch ( ) on main unit to turn the power off. * If the power switch is locked, please disconnect the AC cord plug from the wall outlet. [from the unit] 1 Press the MENU button till the Setup menu is displayed. 2 Press the Volume Up"+" or Down"­" button to select "OSD Language". 3 Press and hold the ENTER button till the Shipping menu is displayed. [. . . ]