User manual PANASONIC TH-50LFB70U

[. . . ] € Descriptive illustrations in this Operating Instructions are created mainly based on the 50 inch model. Important Safety Notice WARNING 1) To prevent damage which may result in fire or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water (flower vase, cups, cosmetics, etc. ) No naked flame sources, such as lighted candles, should be placed on / above the set. [. . . ] € If the Display is moved while some of the cables are still connected, the cables may become damaged, and ¿re or electric shock could result. Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any cleaning. € Electric shocks can result if this is not done. clean the power cable regularly to prevent it becoming dusty. € If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in ¿re. Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth. € Batteries must not be exposed to excessive heat such as sunshine, ¿re or the like. Cleaning and maintenance The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. € If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry. € Do not scratch or hit the surface of the panel with ¿ngernails or other hard objects, otherwise the surface may become damaged. 6 Accessories Accessories Supply Check that you have the accessories and items shown Operating Instruction book Software CD-ROM × 1 Remote Control Transmitter N2QAYB000691 Batteries for the Remote Control Transmitter (R6 (UM3) Size × 2) Clamper × 1 TMME289 English Ferrite core × 2 J0KG00000014 Use the Ferrite cores to comply with the EMC standard. (see page 10) Cable tie × 2 TMM17499 Power supply cord Attention Store small parts in an appropriate manner, and keep them away from young children. Contents in the CD-ROM The contents below are included in the supplied CD-ROM. (Available from the customer service) 1 Attach the clamper hole To remove from the unit: 2 Bundle the cables To loosen: snaps Insert the clamper in a hole. Keep pushing both side snaps hooks Set the tip in the hooks knob Keep pushing the knob 9 Connections For 80 inch model AC cord fixing English Plug the AC cord into the display unit. Note: Make sure that the AC cord is locked on both the left and right sides. Unplug the AC cord Unplug the AC cord pressing the two knobs. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet ¿rst. Using the clamper Secure any excess cables with clamper as required. If you need more clampers, purchase them from your dealer. (Available from the customer service) 1 Attach the clamper hole To remove from the unit: 2 Bundle the cables To loosen: snaps Insert the clamper in a hole. [. . . ] Sound is also reactivated when power is turned off or volume level is changed. FUNCTION buttons (FUNCTION) 1 2 4:3 ƈ COMPONENT Memory name: MEMORY2 4 10:00 Off timer 90min 3 Digital Zoom 17 Specifications TH-50LFB70U Power Source Power Consumption Power on Stand-by condition Power off condition LCD Display panel Screen size (No. 5 Vrms, Shared with VIDEO Compliance with DVI Revision 1. 5 Vrms, Shared with PC IN Y or G with sync 1. [. . . ]