User manual PANASONIC TH-50PV60E

[. . . ] Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. [. . . ] CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Select the "Sys" field Select sound system SC1 : PAL B, G, H / SECAM B, G SC2 : PAL I SC3 : PAL D, K / SECAM D, K F: SECAM L / L' To download channel information to a Q-Link compatible equipment connected to the unit · · OK blue Automatically transmitted (for a few sec. ) For details (p. 20) Not available if "Q-Link" is "Off" in the Setup menu. 14) Store 16 17 Editing and Setting Channels Automatically set the channels received in the area Displaying PC Screen on TV The screen of the PC connected to the unit can be displayed on the TV. You can also listen to PC sound with the audio cable connected. 24) Start Auto setup set WARNING All current tuning data will be erased Select your country Country Deutschland Österreich France Italia España Portugal Nederland Danmark Sverige Norge Suomi Belgium Schweiz ELLADA Polska Ceská republika Magyarország E. Eu OK select OK 1 TV/AV Select the external input TV/AV Set automatically Auto setup Start Auto Setup Exit Return start OK · · · Settings are made automatically The settings are downloaded to a Q-Link compatible equipment connected to the unit. When the sequence is completed, the broadcast of programme number "1" will appear. CH12 2 Select "PC" blue yellow (To next page) Press twice AUTO SETUP IN PROGRESS SEARCHING : PLEASE WAIT 02 78:01 41 · · TV/AV Displays PC screen Corresponding signals (p. 28) If "H-freq. " or "V-freq. " is shown in red, the signals may not be supported. Exit Return To return to TV · · To freely change settings after Auto setup Select the programme number and search through the channel Programme number CH12 Store Repeat and Note If a VCR is connected with only the RF cable, select programme number "0". · PC menu setting (changed as desired) Making settings "How to Use Menu Functions" to (p. 14) Displaying PC Screen on TV Editing and Setting Channels Menu Item W/B High R Adjustments / Configurations(options) White balance of bright red area White balance of bright blue area White balance of dark red area White balance of dark blue area (2. 0 / 2. 2 / 2. 5 / S Curve) Switches to a wide view VGA (640 x 480 dots), WVGA (852 x 480 dots), XGA (1, 024 x 768 dots), WXGA (1, 366 x 768 dots) Options change depending on signals and repeatedly adjusted Picture menu Channel search OK 78:01 41 Viewing mode, Contrast, Brightness, Sharpness, Colour balance (p. 14) W/B High B W/B Low B Gamma Input resolution Clock 1 Manual tuning 02 C 0 Search down/up Store Exit Return 9 Direct entry · · Advanced W/B Low R setting The programme number blinks. Set manually Manual tuning · · Set to the minimum level if noise occurs For Manual tuning, using the buttons on the unit ("Tuning mode" on p. 7) Advanced Adjust horizontal position H-pos Setup menu (Press repeatedly until "Tuning mode" appears) or (Access "Manual tuning") PC setup V-pos Adjust vertical position (Programme, Channel (select), Sound system) or (Change programme or start searching channels) Programme number (flash) Channel number (flash) Sound system (flash) CH12 SC1 (Store) (Repeat) Clock phase 1 Eliminate flicker and distortion Adjust after Clock adjustment · · · Set to the minimum level if noise occurs To return to TV Manual tuning -, + TV / AV STR F 02 STR : : : : Search Move cursor To store To exit 78:01 41 TV / AV Sync Chooses another synchronous signal if the image is distorted (H&V / On G) H&V : by the horizontal and vertical signals from your PC On G : by the green signal from your PC (if available) F -/ +/ Channel · Volume correction, Side panel, Power save, OSD language (p. 14) 18 19 External Equipment Q-Link Q-Link interlocks the TV unit and VCR / DVD recorder, enables easy recording and playback. Control with HDMI " ControlTM" Condition · · · · · Use the VCR / DVD recorder with the following logos: "Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic", or "SMARTLINK" Connect the equipment to this unit's AV2 or AV3 terminal via a "fully-wired" SCART cable. 22) Q-Link terminal setup in Setup menu (Q-Link, AV2/AV3 out). 18) When first using this unit, see "Auto Setup". 16) Download channel settings Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function. HDMI connections to some Panasonic equipments (Panasonic DVD Recorder DIGA, Panasonic Player theatre, Panasonic Amplifier, etc. ) allow you to enjoy the easy playback or home theatre. About connections, see "Connections" (p. Non-HDMI-compliant cables cannot be utilized. About applicable equipments, consult your local Panasonic dealer. Preparations (For the first time / When adding new equipment, reconnecting equipment or changing setup) Features available Some recording equipments are not applicable. Read the manuals of the equipment. After connection turn the equipment on and then switch the TV unit on. Select the input mode to HDMI1 or HDMI2 (p. 11), and make sure that an image is displayed correctly. [. . . ] Macintosh is a registered trademark of Apple Computer, USA. S-VGA is a registered trademark of the Video Electronics Standard Association. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. [. . . ]