User manual PANASONIC TH-80LF50ER

[. . . ] 12 • For more detailed instructions, refer to the Operating Instructions on the CD-ROM. Please read these instructions before operating your set and retain them for future reference. Important Safety Notice WARNING 1) To prevent damage which may result in ¿re or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water (Àower vase, cups, cosmetics, etc. [. . . ] Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result. Be sure to disconnect all cables before moving the Display. € If the Display is moved while some of the cables are still connected, the cables may become damaged, and ¿re or electric shock could result. Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any cleaning. € Electric shocks can result if this is not done. clean the power cable regularly to prevent it becoming dusty. € If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in ¿re. Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth. € Batteries must not be exposed to excessive heat such as sunshine, ¿re or the like. Cleaning and maintenance The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. € If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry. € Do not scratch or hit the surface of the panel with ¿ngernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected. If the cabinet becomes dirty, wipe it with a soft, dry cloth. € If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth. € Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside the unit, operating problems may result. € Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC. Usage of a chemical cloth • Do not use a chemical cloth for the panel surface. [. . . ] Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. € Undgå at beskadige netledningen, foretag ingen form for ændringer af den, anbring ikke tunge genstande oven på den, udsæt den ikke for varme, placer den ikke i nærheden af varme genstande, vrid den ikke, bøj den ikke overdrevent, og træk ikke i den. [. . . ]