User manual PANASONIC TH-R42PV7

[. . . ] 4 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Fitting remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 How to open the front cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note: This is not available when you choose Q-Link Off in Setup menu. Blue DOWNLOAD IN PROGRESS PLEASE WAIT Programme : 63 Remote control unavailable 17 Tuning menu ­ Auto setup Auto setup automatically retunes your TV. This feature is useful if, e. g. , you move house and wish to retune your TV to receive the local stations. Access Setup menu. N MENU OK Move to choose Tuning menu. Notes: · If you proceed with the next step all tuning data will be erased (all stations and their programme positions stored in your TV's memory will be wiped out so the new settings can be stored). · If you exit the procedure after this point and before Auto setup is complete, no station information will be stored. Restart and complete the Auto setup procedure so that the TV is retuned. Select your country. 1 4 7 C 2 5 8 0 3 6 9 TV WARNING All current tuning data will be erased Start Auto Setup Return Exit Press to start Auto setup. The TV will search for, locate, store and then sort into order your local stations. If compatible recording device is connected via the AV2 / AV4 terminal, programme data will be sent to the device via Q-Link. Once this operation is completed the TV will display the programme now stored on programme position 1. Country Deutschland Österreich France Italia España Portugal Nederland Danmark Sverige Norge Suomi Belgiun Schweiz ELLADA Polska Ceska republika Magyarország E. Eu CH12 AUTO SETUP IN PROGRESS SEARCHING : PLEASE WAIT 02 78:01 : Return : To exit 41 Press the EXIT button at any time to go back to watching TV (please read the Notes in the above procedure). EXIT MENU EXIT 18 Tuning menu ­ Manual tuning It is possible to retune individual programme positions: Press the MENU button. Move to choose Manual tuning. TV MENU OK N 1 4 7 C 2 5 8 0 3 6 9 Access Manual tuning. If you wish you can switch off the TV and leave the device recording in the normal way. No recording -Check tape or disc The tape or disc may have been "write protected", missing or may be damaged. Refer to the device's instruction book. Additionally, when using a "Q-Link" device the main features possible are the following : The following features are only available from the device connected to the Scart terminal selected using "Q-Link". TV / Recording device Auto Power On If you insert pre-recorded media into the recording device and press the Play button whilst the TV is in Standby mode, the TV will automatically switch on and select the correct AV input so that you can view the content. Recording device Auto Power Standby When the TV is switched into Standby mode, the recording device will also switch into Standby mode if there is no media inserted, or if there is media inserted and the device is in Rewind or Stop mode. If a VCR is rewinding a tape, it will not switch into Standby mode until rewinding has finished. Recording device Image View On If the TV is in Standby mode and the recording device sends a menu to be displayed on the TV screen (e. g. , Main menu), the TV will automatically switch On and the menu will be displayed. Some other devices may support this feature. Refer to the device's instruction book. This TV will also communicate with other recording device's that bear the following logos : · "DATA LOGIC" (a trademark of Metz Corporation) · "Megalogic" (a trademark of Grundig Corporation) · "Easy Link" (a trademark of Philips Corporation) · "SMARTLINK" (a trademark of Sony Corporation) Important Note: These recording devices may support some or all of the above functions. Not all recording devices support this type of data communication system. Somemay support certain features, but not others. [. . . ] · There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal. · The computer shown in the illustration is for example purposes only. · Additional equipment and cables shown are not supplied with this set. · Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range. [. . . ]