User manual PANASONIC TH-R58PY800

[. . . ] 3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Fitting remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you wish you can switch off the TV and leave the device recording in the normal way. No recording -Check tape or disc The tape or disc may have been "write protected", missing or may be damaged. Refer to the device's instruction book. Additionally, when using a "Q-Link" device the main features possible are the following: The following features are only available from the device connected to the Scart terminal selected using "Q-Link". TV / Recording device Auto Power On If you insert pre-recorded media into the recording device and press the Play button whilst the TV is in Standby mode, the TV will automatically switch on and select the correct AV input so that you can view the content. Recording device Auto Power Standby When the TV is switched into Standby mode, the recording device will also switch into Standby mode if there is no media inserted, or if there is media inserted and the device is in Rewind or Stop mode. If a VCR is rewinding a tape, it will not switch into Standby mode until rewinding has finished. Recording device Image View On If the TV is in Standby mode and the recording device sends a menu to be displayed on the TV screen (e. g. , Main menu), the TV will automatically switch On and the menu will be displayed. This TV will also communicate with other recording device's that bear the following logos: · "DATA LOGIC" (a trademark of Metz Corporation) · "Megalogic" (a trademark of Grundig Corporation) · "Easy Link" (a trademark of Philips Corporation) · "SMARTLINK" (a trademark of Sony Corporation) Important Note: Some recording devices may not support all or some of the above functions. Refer to the instruction book for the device. If Q-Link functions do not work, check the connection and ensure that the scart lead is a fully-wired type. 20 Aspect Controls The Widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect, including widescreen cinema format pictures. Press the ASPECT button repeatedly to move through the eight aspect options: Panasonic Auto, 16:9, 14:9, Just, 4:3, Zoom1, Zoom2 and Zoom3 PC mode: 16:9 and 4:3 OR Press the ASPECT button. Whilst the on screen selector keys are displayed, use the Red or Green buttons to move in either direction through the eight aspect options. If you want to select an operation when the keys are not shown, press the MULTI WINDOW button again and the keys will reappear. Press the MULTI WINDOW button (whilst the selector keys are displayed) to return to normal viewing. When the main and sub windows are both TV mode, these are the same TV channel. · This operation cannot be made during PC mode, HDMI mode, Card operations mode and progressive signal, 1080i signal input (Y, PB, PR). MULTI WINDOW OK 1 4 7 C 2 5 8 0 3 6 9 TV Picture in picture Allows two pictures to be viewed at the same time. Press the Yellow button to select the contents of the smaller window, switching between displaying a TV channel and AV sources in turn. To change the TV channel: press the Yellow button until the currently selected TV channel is shown, then use the remote control to change channel (whilst the on screen selector keys are still displayed). Press the Blue button to swap the contents of the two windows. Use the remote control to select a TV channel or an AV source to appear in the main window. Picture in picture mode 2 AV1 Source Swap main window A B sub window AV1 2 Source Swap Picture out of picture Allows two pictures to be viewed at the same time, as picture in picture does. The difference is how the two pictures are displayed: in Picture in picture the smaller window appears within the main picture; in Picture out of picture the smaller window appears to the right of the main picture. Press the Yellow button to select the contents of the smaller window, switching between displaying a TV channel and AV sources in turn. To change the TV channel: press the Yellow button until the currently selected TV channel is shown, then use the remote control to change channel (whilst the on screen selector keys are still displayed). [. . . ] Note: The permanent after-image on the Plasma TV resulting from fixed image use is not an operating defect and as such is not covered by the Warranty. This product is not designed to display fixed images for extended periods of time. After-images appear ABCDEF Sleep Feature If the set is not switched off when the TV station stops transmitting, it will automatically go to standby mode after 30 minutes. This function will not operate when this TV is in AV mode. Notes: · External surfaces of the unit may become hot during operation. [. . . ]