User manual PANASONIC TP2012DA

[. . . ] THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET. If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician. Caution for AC mains lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. [. . . ] Operate the zoom lever to side and change over the thumbnail display to Highlight & Time Frame Index. (l 32) 1 2 Touch . To display the next (previous) page: j Slide the thumbnail display upward (downward) while touching it. j Touch (up) / (down) on the thumbnail scroll lever. (l 31) [3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]*/[HIGHLIGHT]* * This cannot be set while playing back the scenes in iFrame or the scenes saved as MP4. When select [FACE], it will select the portion for which Face Recognition was performed from the scenes judged to be clearly recorded. This will then be displayed as a thumbnail. A portion judged to be clearly recorded will be detected and displayed in thumbnail if you select [HIGHLIGHT]. Touch the desired search condition. 3 4 (When [MINUTES] is selected) Touch / to set the time. It can be set up to a maximum of 60 minutes. Touch [ENTER]. Touch the thumbnail to be played back. / . Next (Previous) thumbnail can be displayed by touching Repeat Playback Playback of the first scene starts after playback of the last scene finishes. MENU : [VIDEO SETUP] # [REPEAT PLAY] # [ON] The indication appears on the full screen views. All the scenes are played back repeatedly. (When playing back motion pictures by date, all the scenes on the selected date are played back repeatedly. ) 82 VQT3Y48 Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. MENU : [VIDEO SETUP] # [RESUME PLAY] # [ON] appears on the thumbnail view of the stopped If playback of a motion picture is stopped, scene. The memorised resume position is cleared if you turn off the unit or change the mode. (The setting of [RESUME PLAY] does not change. ) Zooming in on a still picture during playback (Playback zoom) You can zoom in by touching a still picture during playback. 1 Touch and hold the part you wish to zoom in on during still picture playback. It will display enlarged in order of normal display (k1) # k2 # k4. Recommended for fast moving scene such as sports scene. Set the combination of the effect and the music. (l 86) [POP]: [NATURAL]: [CLASSICAL]: [DYNAMIC]: [CUSTOM]: The scenes matching the effect will be extracted and displayed in the thumbnail view. Effects such as fade, slow-motion, still (pause), or digest playback are inserted. It will be played back with the date of last recording. To change the settings, refer to page 87. 3 4 Touch in the thumbnail view. To change the settings, refer to page 87. Select the playback operation. (l 31, 80) When the playback is finished or stopped, the screen to select [SAVE] (l 90), [SELECT AGAIN] or [EXIT] is displayed. Playing back of all the scenes returns if the unit is turned off or the mode is changed. Slow-motion Playback and Frame-by-frame Playback are not possible. VQT3Y48 85 Setting up the custom effect It is possible to enjoy the Highlight Playback with your favourite effect by setting up the combination of an image effect and music. 1 2 3 Touch [CUSTOM]. Touch [EFFECT SETUP] or [MUSIC SELECT]. (When [EFFECT SETUP] is selected) Touch the desired effect. When [EFFECT SETUP] is changed, [MUSIC SELECT] will be set the same as [EFFECT SETUP]. (To set [EFFECT SETUP] and [MUSIC SELECT] to different settings, change [MUSIC SELECT] after setting [EFFECT SETUP]. ) (When [MUSIC SELECT] is selected) Touch the desired sound. When [EFFECT SETUP] is set to [NONE], you will be able to select [NO MUSIC]. [. . . ] *3 External microphone may intrude into the frame when recording. Set the zoom to wide angle, and tilt the external microphone upward so it will not intrude into the frame. This will not affect the audio being recorded. When removing the shoe adaptor, slide the SHOE ADAPTOR RELEASE lever, and remove the shoe adaptor while sliding the lever. SHOE ADAPTOR RELEASE Attaching the supplied shoe adaptor Insert the shoe adaptor into the shoe adaptor mounting part. VQT3Y48 161 Attaching the conversion lens/filter kit Attach the wide conversion lens (VW-W4907H: optional), ND filter or MC protector of the Filter kit (VW-LF46NE: optional) in front of the lens. [. . . ]