User manual PANASONIC TU-CT20

[. . . ] Do not place the receiver in the immediate vicinity of a heat source or in direct sunlight as this would prevent appropriate cooling. To prevent fire, never place any type of candle or naked flame on top of or near the Digital converter box (DCB). Caring for your Digital converter box (DCB) Remove the mains plug from the wall socket. The cabinet can be cleaned with a dry clean cloth. [. . . ] The number of options available depends on each broadcast. Note: When you change channel you will need to reset your Multi-Audio preference. RF Output The software will automatically allocate an available channel position for RF output. Should there be any interference you can change the RF output channel using number buttons or you can switch off RF output by inputting 00. To return to Setup press Setup button. 6 SETUP Tuning Menu Using OK button to access menu. Auto Setup (Free To View) Press OK to access menu. The DCB will now search for all available free to view channels, sort them and store them ready for use. Auto Setup (All Services) Press OK to access menu. The DCB will now search for all available channels, sort them and store them ready for use. You may find that you will locate some stations which from time to time will preview future programming. Note: If Autosetup is run you may have to tune your TV receiver for RF output. New Service Message Should a new service become available you will be notified via an on-screen display. To add this new service simply access Auto Setup (All Services) and update your programme list. Press left/right buttons to change this function from on to off. Shipping Condition Allows you to clear all tuning information and reset back to factory settings. The DCB will then perform Auto-Setup after reset. Note: Owner ID will not be reset. Owner ID Allows you to enter a security code and address information. To return to Setup press Setup button Software Update Menu Use OK button to access menu. Software Update From time to time new versions of software will become available. To confirm whether you have the latest version press OK. The DCB will confirm version of software and if available download latest version. Note: The unit will automatically detect new software versions and an on screen indication will appear. To exit from SETUP press the EXIT button. 7 TV Guide Press GUIDE button to access TV Guide. The TV Guide is a helpful and easy to use on-screen feature. To quickly scroll through all available channels press the up/down buttons. To change page use the left/right buttons. Press the Blue button (Favourite) to add your most frequently watched programme positions and display them as a list in the TV Guide. To delete a selection from your Favourite list, select the programme and press the blue button, the tick will disappear and the selection will be removed from the list. [. . . ] The sales company or national distributor may be in a position to make the necessary adjustments or adaptations to certain product models at the cost of the purchaser. However, for technical reasons it is not possible to adjust or adapt all product models to comply with local voltage requirements and safety or other technical standards. Moreover where adaptations or adjustments are carried out the performance of the appliance may be affected. If in the opinion of the sales company or national distributor in the country where the appliance is used the purchaser has the necessary adjustments or adaptations to local voltage requirements and technical or safety standards properly made, any subsequent guarantee repair service will be provided as above indicated, provided the purchaser discloses the nature of the adjustment or adaptation if relevant to the repair. [. . . ]