User manual PANASONIC TU-DST50W

[. . . ] 28 Front AV3 4 pin S-Video, RCA Audio / Video and Headphone Sockets . 28 Scart and S-Video Socket Information . 28 Rear AV1/AV2(S)/AV4(S) 21 Pin Scart . 31 WARNINGS AND PRECAUTIONS BThis receiver is designed to operate on A. C. [. . . ] CH41 - CH44 - - Name XYZ ZXY Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Choose the new character Move to the next character position Continue until renaming is done. Press STR to store If you have finished in the Programme edit menu, press the TV/AV button to exit. ABCDEFGH I J KLM NOPQRSTUVWXYZ +- . 012 34 5 6 789 18 TUNING MENU - PROGRAMME EDIT To lock a programme position to prevent access Choose the programme position. Lock off/on Return TV/AV 'STR' Button Select option Exit Store Move to the lock column. Programme edit Choose between lock On or lock Off Prog. CH41 - CH44 - - Name XYZ ZXY Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Press STR to store. If you have finished in the Programme edit menu, press the TV/AV button to exit. Note: When a programme position is locked, Direct Channel Access using the `C' and numeric keys on the remote control is not available. To change the TV-system for a programme position Choose the programme position Return TV/AV 'STR' Button Change TV system Select option Exit Store Move to the Sys column Choose the required sound system: SC1 : PAL B, G, H / SECAM B, G SC2 : PAL I SC3 : PAL D, K / SECAM D, K F : SECAM L/L' Press STR to store If you have finished in the programme edit menu, press the TV/AV button to exit Programme edit Prog. CH41 - CH44 - - Name XYZ ZXY Lock Off Off Off Off Off Sys SC1 SC1 SC2 SC1 SC1 To copy programme information to a compatible VCR connected to AV2 Move to the Prog. Column. Return TV/AV 'STR' Button Change programme Select option Exit Store Press the Blue button on the remote control. Programme data will now be sent to the VCR. This might take a few seconds, depending on the number of stations stored. If you have finished in the Programme edit menu, press the TV/AV button to exit. A message, sent from the VCR, will appear on screen showing what is being recorded, or if it is not possible to record; VCR recording preset prog VCR recording own tuner VCR is recording the programme signal from its own tuner. If you wish you can switch off the receiver and leave the VCR recording in the normal way. VCR recording TV source VCR is recording the programme signal from the receiver. You must not change programme position or switch off the receiver: if you do, the VCR will automatically stop recording and switch off. No recording TAPE IS PROTECTED The write protection tab on the back of the cassette has been removed. Examples of other messages that might be displayed are: No recording NO TAPE No recording VCR IS PLAYING VCR Recording VCR external No recording VCR ALREADY RECORDING No recording TAPE MAY BE DAMAGED No recording NO SOURCE AVAILABLE To share tuning information To ensure correct recordings are made, the receiver and VCR should share tuning information - see page 20. B Whenever the Auto setup (ATP) function is used, tuning data will be downloaded to the VCR. Auto Power Functions With Panasonic Q-Link VCRs these additional features are available: B If you insert a tape in your VCR and press the Play button, the receiver will automatically switch on and select the AV2 input so you can view the tape. B If you switch off the receiver whilst the VCR is in Stop, Fast Forward or Rewind modes, the VCR will switch off automatically. To turn off Q-Link communication If you do not wish to use the Q-Link feature, go to the Setup menu and set the Q-Link option to "Off". Important Note: Not all VCRs support this type of data communication system. Some may support certain features, but not others. See the VCR handbook for further information. [. . . ] It is possible to enter your required sub page and continue watching the normal programme until the correct sub page is found. Select the required page number using buttons 0 - 9. Press the SET UP button to followed by the Blue button; T**** will be displayed at the top right of the screen. Enter desired sub page number before the T**** disappears. [. . . ]