User manual PANASONIC TU-IRD10

[. . . ] Dependent upon the recording, the Divide Process may take several minutes to complete. 25 TU-IRD10 Pausing Live Broadcasts (Live 1 or Live 2) This PVR allows you to pause a live broadcast and resume watching it later. The length of time you can pause a live broadcast is dependent on the Live TV buffer setting in the Picture and Sound Menu (see page 11). To pause a live broadcast press the Pause key. This will freeze the picture and the following message box will appear on screen. You cannot use the Source key to switch to another channel while in pause mode. [. . . ] Press the Red key to select the source of the Small window. Choose between live broadcast or Archive recording playback if available. Use the Yellow (Prog+) and Blue key (Prog-) to step through available channels. If the source in the smaller window is being recorded, the yellow and blue keys are disabled. Press the Green key to swap the contents of the two windows To change the channel that is displayed full screen, use the channel up/down key Only the Picture that is displayed full screen will have audio. PAP (Picture and Picture) This function displays two pictures side by side in equal sized windows. The colour keys control the contents of the window highlighted with a Blue border. Colour key operations are displayed at the bottom of the screen. Press the Red key to select the source of the highlighted window. Choose between live broadcast or archive recording playback, if available. Use the Yellow key (Prog+) and Blue key (Prog-) to step through the available channels. If the source in the highlighted window is being recorded, the yellow and blue keys are disabled. At the bottom of the screen there are two colour key options: External Link ­ Use the Green key to toggle the External link option between On and Off. Certain VCR/DVD Recorders are equipped with External Link recording control. By turning this option on, the PVR will automatically control the recording of the attached recording equipment. Please refer to your recorder user manual to confirm if your recording device is compatible with this system. Subtitle Display - Use the Yellow key to toggle the Subtitle option between On and Off. If this option is set to On and subtitles are available on the recordings, they will be displayed during the dubbing session and recorded to the attached recording device. Once these options have been set, select one of the main options: Start Dubbing Now ­ If you wish to dub the recordings to an attached external recording device immediately, please ensure that the recording device is loaded with recordable media of sufficent recording length and is ready to record. To transfer the selected recordings to the attached recording device immediately, select the Start Dubbing Now option and press the OK key. Set Timer for Dubbing ­ Allows the user to dub the recordings at a set date and time. To dub the recordings at a later time, select the Set Timer for Dubbing option and press the Red key. Enter the Date and Time using the cusor keys or the numeric keys. [. . . ] Some product models require adjustment or adaptation for proper performance and safe use in safety or other technical standards imposed or recommended by applicable regulations. For certain product models the cost of such adjustment or adaptation may be substantial and it may be difficult to satisfy local voltage requirements and safety or other technical standards. It is strongly recommended that the purchaser investigate these local technical and safety factors before using the appliance in another EU/EEA country or Turkey. The guarantee shall not cover the cost of any adjustments or adaptations to meet local voltage requirements and safety or other technical standards. [. . . ]