User manual PANASONIC TX-14JT1

[. . . ] Remove the mains plug from the wall socket when the TV set is not to be used for a prolonged period of time. Do not pull the power cable to remove the mains plug from the socket, always remove it by the plug. CABINET AND PICTURE TUBE CARE Remove the mains plug from the wall socket. The cabinet and picture tube can be cleaned with a soft cloth moistened with mild detergent and water. [. . . ] Channel 5 and the Satellite channel are pre---allocated to programme positions 6 and 7 respectively. If the order is not to your preference it can be rearranged. Refer to the Tuning menu Swap feature --- see page 11 for details. IT IS IMPORTANT that you only use TV programme position `0' to view your VCR. If your VCR picture does not appear on programme position `0' (the VCR position), it will be necessary to either adjust the RF channel of the VCR (refer to your VCR operating instructions) or to adjust the tuning of the TV's programme position `0' or both until the RF output channel of the VCR is received, refer to page 14 for guidance. 6 LOCATION OF CONTROLS On Screen Displays Menu Title Cursor Bar Sub Menu Commands : A guide to the various options available when in On Screen Menu operations. Front Panel Controls Main Menu Contrast Brightness Colour Sharpness C---A---T---S Tuning Menu : Select ---/+ : Adjust N : Exit Mains Power On/Off switch STR Stores tuning and other function settings F Selects a function from : Volume, Contrast, Brightness, Colour, Sharpness, C---A---T---S and Manual Tuning. Remote Control keys Standby On/Off Adjusts currently selected function. First access the Tuning menu as described above. 1 Access "Auto Setup" 1 CH44 2 Start Tuning Menu Auto Setup Manual Tuning Shipping Condition Swap : Select ---/+ : Access F : Previous Menu N : Exit Auto Setup TV/AV : Start F : Previous Menu N : Exit Tuning data will be Erased ! 3 Confirm Start 4 1 CH44 Ready to go Auto Setup TV/AV : Yes F : Previous Menu N : Exit Tuning data will be Erased !Are you sure ? TELETEXT 9 MENU OPERATION Shipping Condition start Manual Tuning store Adjust / Access Manual Tuning search Exit Menu Select Manual Tuning programme select Display Menu / Previous Menu Manual Tuning The Manual tuning menu allows individual programme positions to be tuned manually. First access the Tuning menu as described on Page 9. Access "Manual Tuning" 1. Store Repeat steps 1 to 3 as necessary to store other channels 1 1 Tuning Menu Auto Setup Manual Tuning Manual Tuning : ---/+ : TV/AV : F : N : Programme Position Start Search Store Previous Menu Exit Shipping Condition Swap : Select ---/+ : Access F : Previous Menu N : Exit 21 69 Shipping Condition Allows you to clear all tuning information and reset all control levels back to the factory settings. First access the Tuning menu as described on Page 9. 1 Access "Shipping Condition" 1 Tuning Menu Auto Setup Manual Tuning Swap 2 Start Shipping Condition TV/AV : Start F : Previous Menu N : Exit Tuning data will be Erased ! Shipping Condition : Select ---/+ : Access F : Previous Menu N : Exit 10 MENU OPERATION Shipping Condition (Continued) 3 Confirm Start 4 Ready for Auto Setup or Manual Tuning. Refer to Page 9 and 10. 1 Shipping Condition TV/AV : Yes F : Previous Menu N : Exit Tuning data will be Erased !Are you sure ? Tuning Menu Auto Setup Manual Tuning Swap Shipping Condition : Select ---/+ : Access F : Previous Menu N : Exit Swap If the programme order after Auto Setup is not to your preference you can swap programmes between positions. An example could be for regional variations, e. g. BBC1 Wales and BBC1 West, where you may want to swap them so that BBC1 West appears on programme position 1. First access the Tuning menu as described on Page 9. Access "Swap" 1 CH44 Swap programmes Swap Position with Position 01 07 CH44 CH58 Tuning Menu Auto Setup Manual Tuning Shipping Condition Swap : ---/+ : F: N: Select Access Previous Menu Exit ---/+ TV/AV F N : : : : : Select Adjust Swap Previous Menu Exit Manual Tuning (front panel of the television) The stations may also be manually tuned using the controls on the front of the television. Press the F key (Front panel) until "Manual Tuning" is reached. Press --- or + to access "Manual Tuning". Manual Tuning (Front Panel) TV/AV ---/+ STR F, N : : : : Programme Position Start Search Store Exit 21 69 Store Function select / Exit Change programme position Search 11 TELETEXT OPERATION D Teletext features may vary depending on the Broadcasting Companies and are only available if the selected channel is transmitting Teletext. D If the F button is pressed in Teletext mode the cyan contrast scale will appear; press buttons "+" and "---" to change the settings. D When in Teletext mode, the volume may still be adjusted by pressing buttons "+" or "---". What is LIST mode? In LIST mode four differently coloured page numbers are situated at the bottom of the screen. To select the required Teletext page push the appropriately coloured button. What is FLOF (FASTEXT)? In FASTEXT mode four differently coloured subjects are shown at the bottom of the screen. To access more information about one of these subjects, push the appropriately coloured button. This function allows fast access to information on the subjects shown. TV/TEXT TV/Teletext Mode Index Hold Press the TV/TEXT button. The screen will display the Teletext page. [. . . ] Weight and dimensions shown are approximate. UHF 3, 5mm, 8 impedance, mono 21 pin terminal --- Audio/Video in/out, RGB in RCA Audio in/RCA Video in SCART TERMINAL INFORMATION 20 18 16 14 12 10 8 6 4 2 21 19 17 15 13 11 9 7 531 1. 21. Audio out (R) Audio in (R) Audio out (L) Ground Ground Audio in (L) Blue in Status CVBS Ground --- --Green in --- --Ground Ground Red in Status RGB Ground RGB Status ground CVBS out (video) CVBS in (video) Socket ground 17 18 19 Sales and Support Information Customer Care Centre S S S S For UK customers: 08705 357357. For Republic of Ireland customers: 01 289 8333. Visit our website for product information www. panasonic. co. uk. [. . . ]