User manual PANASONIC TX-19LXD8

[. . . ] Later you may read this manual and use it for further reference. This Multi Media Terminal set is designed to be connected to an AC 100-240V, 50/60Hz power source. To avoid damage that may result in an electric shock or fire do not expose the unit to rain or excessive moisture. Do not remove the rear cover as live parts and high-voltage components are accessible. [. . . ] When the required programme is found save it by pressing either button "TV/AV" or STR (on the front panel of the Tuner). Keep pressing button "F" until "Manual tuning" is displayed. When the required station is found press button "STR" to save the changes. To tune in to other programmes, repeat the above procedure or finish the tuning by pressing button "F". Note: If you know the channel numbers of your broadcasting stations, you may use direct channel selection by using button "C" on the remote control unit to save the channels quickly: - enter Manual menu; - pre-set the programme number; - Press button "C". - set the channel number with the numbered buttons; - save with button "AV/TV". - leave the menu by pressing button "N". If you want to use direct channel selection in the "Hyperband" (cable TV), press the direct channel selection button and programme position button ("C" and "-/--") one after the other and set the number with the numbered buttons. "CH­ ­" will first appear in the left top corner of the screen, and then "H:­ ­". The Swap option allows you to swap between two programme positions. When first setting up your television, select the OSD language to match your country selection. Page status line at the bottom of the screen so you always know which button will take you to the information required. Press this button to return to the main index page. Depending on the status you may have to press a few times to return to the main index page. You can select pages in two different ways: a) Press one of the keys to change the page number by 1, or b) enter the desired page number using the keys 0-9 on the remote control. When Teletext information exceeds more than one page, it may take some time for the automatic changing of the sub pages to reach the sub page you require. Enter the desired sub ­ page number . to select sub ­ page 6 , enter 0 , 0 , 0 and 6. The TV is now searching for the correct sub page. You can continue watching the TV programme by pressing the TV/TEXT button. If you switch back to Teletext and if the entered page is already available, the sub page will be displayed until a new page or programme position is entered. Press again to return to normal (full) size. [. . . ] If the antenna lead runs close to a computer, move it away a slight distance. Alongside the computer signal cables, The direction may have been changed by strong winds. Separate by a small distance or run by · Are you receiving signal reflections from mountains or a different route. Reception can possibly be improved by moving the TV to a different location. [. . . ]