User manual PANASONIC TX-2

[. . . ] 22 Via the front AV3 Audio / Video (RCA) and Headphone Sockets . 22 SCART and S---Video Terminal Information . 22 Via the rear AV1 / AV2 21 Pin (SCART) and RCA Audio Out terminals . 25 WARNINGS AND PRECAUTIONS D This TV set is designed to operate on A. C. [. . . ] Decoder (AV2) Access Press the Red button on remote control Press the Red button again to confirm If you have finished in the Programme edit menu, press the TV/AV button to exit AUTO Off TV/AV Return - TV/AV STR Change programme Select option Exit Store Programme edit Prog. 1: 2: 3: 4: 5: CH41 - Chan. XYZ Name Off Off Off Off Off Move Lock Sys SC1 SC1 SC1 SC1 SC1 Delete Add TV > VCR 10 TUNING MENU --- PROGRAMME EDIT To add a programme position Choose the programme position where the new program is to be inserted Return - TV/AV STR Change programme Select option Exit Store Press the Green button Press the Green button again to confirm This blank programme can then be tuned, named, locked and be allocated your choice of TV ---system Press STR to store If you have finished in the Programme edit menu, press the TV/AV button to exit Programme edit Prog. 1: 2: 3: 4: 5: CH41 CH44 - Chan. XYZ ZXY Name Off Off Off Off Off Move Lock Sys SC1 SC1 SC1 SC1 SC1 Delete STR Add TV > VCR TV/AV To move a programme to another position Return - Choose the programme position to be moved TV/AV STR Change programme Select option Exit Store Programme edit Prog. 1: 2: 3: 4: 5: CH41 CH44 - Chan. XYZ ZXY Name Press the Yellow button on remote control Off Off Off Off Off Move Lock Sys SC1 SC1 SC1 SC1 SC1 Delete Add TV > VCR Choose new position Change programme Select option Exit Store Press the Yellow button again to confirm Return - TV/AV STR Programme edit TV/AV If you have finished in the Programme edit menu, press the TV/AV button to exit Prog. 1: 2: 3: 4: 5: CH41 CH44 Chan. XYZ Name ZXY Add Off Off Off Off Off Move Lock Sys SC1 SC1 SC1 SC1 SC1 Delete TV > VCR 11 TUNING MENU --- PROGRAMME EDIT To tune a programme position Choose the programme position Move to the channel column Return - TV/AV STR Change channel Select option Exit Store Programme edit Increase or decrease channel number or use the 'C' key for Direct Channel Access (see page 4) Prog. 1: 2: 3: 4: 5: STR CH41 CH44 - Chan. XYZ ZXY Name Off Off Off Off Off Lock Sys SC1 SC1 SC1 SC1 SC1 Press STR to store If you have finished in the Programme edit menu, press the TV/AV button to exit TV/AV To rename a programme position Change character Select option Exit Store Choose the programme position Return - TV/AV STR Programme edit Move to the Name column Prog. 1: 2: 3: 4: 5: CH41 CH44 - Chan. XYZ ZXY Name Choose the new character Off Off Off Off Off Lock Sys SC1 SC1 SC1 SC1 SC1 ABCDEFGHIJKLM NOPQRSTUVWXYZ +- . 0123456789 - Move to the next character position Continue until renaming is done Press STR to store If you have finished in the Programme edit menu, press the TV/AV button to exit STR TV/AV 12 TUNING MENU --- PROGRAMME EDIT To lock a programme position to prevent access Choose the programme position Lock On/Off Select option Exit Store Move to the lock column Return TV/AV STR Choose between lock on or lock off Programme edit STR Press STR to store If you have finished in the Programme edit menu, press the TV/AV button to exit Prog. 1: 2: 3: 4: 5: TV/AV CH41 CH44 - Chan. XYZ ZXY Name Off Off Off Off Off Lock Sys SC1 SC1 SC1 SC1 SC1 Note : When a programme position is locked, Direct Channel Access using the 'C' and numeric keys on the remote control is not available. To change the TV---system for a programme position Choose the programme position Change TV system Adjust option Exit Store Move to the Sys column Choose the required sound system: SC1 : PAL B, G, H / SECAM B, G SC2 : PAL D, K / SECAM D, K STR Return - TV/AV STR Programme edit Prog. 1: 2: 3: 4: 5: CH41 CH44 - Chan. XYZ ZXY Name Off Off Off Off Off Lock Sys SC1 SC1 SC2 SC1 SC1 Press STR to store If you have finished in the Programme edit menu, press the TV/AV button to exit TV/AV To copy programme information to a compatible VCR connected to AV2 Move to the Prog. column Press the Blue button on the remote control. Programme data will now be sent to the VCR. This might take a few seconds, depending on the number of stations stored. If you have finished in the Programme edit menu, press the TV/AV button to exit TV>VCR IN PROGRESS PLEASE WAIT TV/AV Programme : 63 Remote control unavailable 13 TUNING MENU --- AUTO SETUP (ATP) The Auto setup menu will allow you to automatically retune the TV to your local stations. It is useful if you move to a different region SET UP Open the Setup menu Select Move to Tuning menu TV/AV Access Exit Setup menu Access Tuning menu Teletext Aspect Off timer Q-Link Tuning menu OSD language FLOF 4:3 Off Off Access Move to Auto setup Access Auto setup 1 CH41 Return - Select Access Press to confirm start TV/AV STR Exit Store Tuning menu Select your country Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) Access AUTO Off Press to start Auto setup (ATP) The TV will search for, locate and sort into order your local stations. If a compatible VCR is connected via the AV2 socket, programme data will be sent to the VCR via Q---Link (see page 17). WARNING All current tuning data will be erased Start Auto setup TV/AV Exit CH41 AUTO SETUP IN PROGRESS Once this operation is completed the TV will display programme position 1. SEARCHING : PLEASE WAIT Found : CH41 XYZ 02 78:01 41 SETUP : Return to tuning menu TV/AV : To exit 14 TUNING MENU --- MANUAL TUNING Manual tuning of the Programme positions is available either from the On Screen Display menu or from the front panel controls Manual tuning menu Open the Setup menu SET UP 1 CH41 Return TV/AV STR Select Access Exit Store Move to Tuning menu Tuning menu Access Tuning menu Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) Access AUTO Off Move to Manual tuning Access Manual tuning 1 Select the programme position to be tuned CH41 Start tuning STR Return - TV/AV STR Programme down/up Search down/up Exit Store When the desired programme is found, press STR to store Press the TV/AV button to exit. Manual tuning TV/AV 02 78:01 41 Manual tuning (Front panel) Press the F button (Front panel) until "Tuning mode" is reached Press the --- or + button to access Tuning mode Press the TV/AV button to move between "Change programme", "Search" or "Change TV system" Press the --- or + button to change programme position, start search, or alter TV system When the desired station is found, press STR to store the changes Repeat above procedure to tune additional programmes or press the F button to exit --- /v F 1 CH41 SC1 Manual tuning (Front panel) TV/AV -, + TV/AV STR F 02 : : : : Search Move cursor To store To exit 78:01 STR F -/V +/ TV/AV STR --- /v 41 F 15 OSD LANGUAGE When you first installed the TV the On Screen Display language was set according to your choice of country. If you wish to use a different language then it can be chosen from the OSD language menu SET UP Open the Setup menu Select Access Move to the OSD language menu TV/AV Exit Setup menu Teletext Aspect Off timer Q-Link Tuning menu OSD language FLOF 4:3 Off Off Access Access the OSD language menu Move to your choice Select Press the TV/AV button to select and exit TV/AV Return TV/AV Select Exit OSD language Deutsch English Français Italiano ELLHNIKA Español Norsk Dansk Svenska Nederlands Suomi Türkçe Português 16 Q---LINK Q---Link allows the television to communicate with your VCR Open the Setup menu SET UP Select Move to Q---Link TV/AV Change Exit Setup menu Confirm Q---Link is set to "On" Teletext Aspect Off timer Q-Link Tuning menu OSD language FLOF 4:3 Off On Press the TV/AV button to exit TV/AV The VCR must be connected with a SCART lead (full function type) attached between the AV2 socket of the television and the appropriate socket on your VCR. Pause / Still 0 REC DVD VCR PROGRAMME N STR Press in playback mode, the picture will pause. Press again to restart play. HELP ? Programme Up / Down Press to increase or decrease the VCR programme position by one. REC Record Press this button to start recording. 19 TELETEXT OPERATION D Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting Teletext. D Pressing the Picture button whilst in Teletext operation will display the contrast function with a cyan bar, press A "to alter the setting as required. Pressing the Setup button whilst in Teletext operation will display special function options at the bottom of the screen. D When in Teletext mode, the volume may still be altered to the desired listening level. What is LIST mode? In LIST mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these numbers can be altered and stored in the TV's memory. What is FLOF (FASTEXT)? In FASTEXT mode, four differently coloured subjects are situated at the bottom of the display. To access more information about one of these subjects, press the appropriately coloured button. This facility enables fast access to information of the subjects shown. TV/TEXT TV / Teletext mode Press the TV/TEXT button. The screen will display the Teletext page. Press again when you wish to return to TV. mode. Page Selection Pages can be selected in two ways : a. [. . . ] Press the Yellow button to view the page. operation. Sub Coded Page Access SET UP When Teletext information exceeds more than one page, it may take some time for the automatic changing of the sub pages to reach the sub page you require. It is possible to enter your required sub page and continue watching the normal programme until the correct sub page is found. Select the required page number using buttons 0 --- 9. [. . . ]