User manual PANASONIC TX-2044

[. . . ] 27 SCART and S--Video Socket information . 31 2 WARNINGS AND PRECAUTIONS D This TV set is designed to operate on A. C. D To prevent damage which might result in electric shock or fire, do not expose this TV set to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV. D Adequate ventilation is essential to prevent failure of electrical components, we recommend that a gap of at least 5cm is left all around this television receiver even when it is placed inside a cabinet or between shelves. D WARNING : HIGH VOLTAGE !!! [. . . ] See Step 7, page 7 (Quick Start Guide). Teletext Off timer Flicker reduction Q-Link Text language Tuning menu OSD language Geomagnetic 14 TUNING MENU The Tuning menu provides access to manual, automatic and fine tuning menus Open the Setup menu Move to Tuning menu Access Tuning menu Move to your choice Increase or decrease levels, set options or access further menus Press the TV/AV button to exit Pressing the STR button after having adjusted some features will store the setting as the default (replacing the factory setting) TV/AV SET UP Setup menu AV2 out Teletext Off timer Flicker reduction Q-Link Text language Tuning menu OSD language Geomagnetic TV List Off On On West Access Tuning menu Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) Access STR Auto Off Programme edit Accessing the Programme edit menu will allow stations to be moved, added, deleted, named or locked and provides access to the TV --system. The Auto setup menu allows you to automatically retune the TV. The Manual tuning menu allows individual programme positions to be tuned manually. Stations can be finely tuned using the Fine tuning adjustment. The Colour system menu allows you to decide the correct choice of transmission standard. Volume correction allows you to adjust the volume level of individual stations. This option is used when a decoder is connected via AV2. Set to On if a scrambled signal is to be processed by the decoder. Set to Off after use. Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) 15 TUNING MENU - PROGRAMME EDIT The Programme edit menu allows you to edit the programme position settings Open the Setup menu Move to Tuning menu SET UP Tuning menu Access Tuning menu Move to Programme edit menu Access Programme edit menu Move to chosen programme position (eg: Prog. See the VCR handbook for further information. Q--Link, NEXTVIEWLINK or similar technology allows the television to instruct a compatible VCR to record the programme that is currently being displayed on screen, regardless of the programme position set on the VCR, thus simplifying the process of recording programmes. To record the programme you are currently watching DIRECT TV REC Press the DIRECT TV REC button on the remote control If the VCR is off, it will automatically switch on when you press the DIRECT TV REC button. A message, sent from the VCR, will appear on screen showing what is being recorded, or if it is not possible to record: VCR recording preset prog VCR recording own tuner VCR is recording the programme signal from its own tuner. If you wish you can switch off the TV and leave the VCR recording in the normal way. VCR recording TV source VCR is recording the programme signal from the television. You must not change programme position or switch off the TV: if you do, the VCR will automatically stop recording and switch off. No recording - TAPE IS PROTECTED The write protection tab on the back of the cassette has been removed. Examples of other messages that might be displayed are: No recording - NO TAPE No recording - VCR IS PLAYING VCR Recording VCR external No recording - ALREADY RECORDING!No recording - TAPE MAY BE DAMAGED No recording - NO SOURCE AVAILABLE 22 Q-LINK To share tuning information To ensure correct recordings are made, the television and VCR should share tuning information -- see page 19. D Whenever the Auto setup (ATP) function is used, tuning data will be downloaded to the VCR. Auto Power functions With Panasonic Q--Link VCRs these additional features are available: D If you insert a tape in your VCR and press the Play button, the television will automatically switch on and select the AV2 input so you can view the tape. D If you switch off the television whilst the VCR is in Stop, Fast Forward or Rewind modes, the VCR will switch off automatically. To turn off Q-Link communication If you do not wish to use the Q--Link feature, go to the Setup menu and set the Q--Link option to "Off". Important Note: Not all VCRs support this type of data communication system. Some may support certain features, but not others. [. . . ] Press the Yellow button to view the page. Press TV / TEXT to return to normal TV operation. SET UP 26 AUDIO / VIDEO CONNECTIONS AV Select and Setup It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external equipment to both the front and rear of the TV. Once your equipment is connected, use the following procedure to view the input: TV/AV Press the TV/AV menu button Press the relevant on screen selector key to select the AV source you wish to view (for example, press the green button to select AV2 if you have connected a video recorder to the AV2 SCART socket). [. . . ]